Reviews » Hardware

avatar

Asus GeForce GTX 670 DirectCU II TOP Review

Posted 09/26/2012 at 7:02am | by Nathan Edwards

More power than a stock GTX 680

Every GPU generation has its flagship videocards: the ones with the top-of-the-line GPU with all cores enabled, loaded for bear. In this generation, those cards are Nvidia’s GTX 680 (with a full GK104 GPU inside) and AMD’s Radeon HD 7970 (with a full Tahiti GPU). These cards are monstrously fast, but they’re also expensive and tricky to manufacture. Not all parts come off the line fully functional. So a few months after each flagship GPU launch, the vendors come out with a slightly stripped-down version that uses binned top-end GPUs with a few parts disabled, or lower clock speeds. AMD’s Radeon HD 7950, for example, uses the same GPU as the 7970, but with 28 GCN units instead of 32, and with an 800MHz reference clock instead of 925MHz. The cheaper, lower-powered video cards appeal both to gamers with shallower pockets and also to vendors, who clock those stripped-down, less expensive GPUs right back up to within spitting distance of their full-powered peers. Thus we arrive at the Asus GeForce GTX 670 DirectCU II TOP, a factory-overclocked GTX 670 with a custom cooling solution.

The DirectCU II cooler’s three direct-contact heat pipes keep the GPU cool.

» Read More
avatar

MSI Z77A-GD65 Review

Posted 09/26/2012 at 4:27am | by Gordon Mah Ung

MSI Z77A-GD65

Midrange boards typically have to sacrifice features to get under $200 and MSI’s Z77A-GD65 shows evidence of this philosophy. It’s the only board here without a discrete USB 3.0 controller, instead relying on the native Intel chipset for all USB 3.0. It’s also the only board without DisplayPort.

MSI shaved costs by jettisoning extra USB 3.0 ports on the Z77A-GD65.

» Read More
avatar

Asus P8Z77-V Review

Posted 09/26/2012 at 4:19am | by Gordon Mah Ung

Asus P8Z77-V

Apparently budget board means legacy support. That’s what we inferred from Asus’s P8Z77-V board, which has a quaint PS/2 port and not one, but two PCI slots. Don’t think that means Asus cheaped out on more modern amenities, though. Although there’s no eSATA or FireWire, Asus includes some truly compelling features such as onboard Wi-Fi, an Intel LAN controller, incredibly fast USB 3.0, and a revamped Fan Xpert 2.

» Read More
avatar

Gigabyte GA-Z77X-UD5H Review

Posted 09/26/2012 at 4:01am | by Gordon Mah Ung

Gigabyte GA-Z77X-UD5H

Of all the boards here, we’re most intimately familiar with Gigabyte’s GA-Z77X-UD5H. It’s the board we used for the bulk of our Core i7-3770K testing, and one thing we can say, it’s stable. We’ve literally run more than 50 hours of benchmarks on this board without any issue.

We hit our highest auto-overclock with the Gigabyte GA-Z77X-UD5H.

» Read More
avatar

Cooler Master TPC 812 Review

Posted 09/18/2012 at 8:00am | by Nathan Edwards

Vertical vapor chamber—blowing hot air?

WE  HAVE BEEN anxious to test Cooler Master’s TPC 812 since we saw a prototype at this year’s CES—or was it last year’s? Regardless, the company piqued our interest with its talk of “vertical vapor chamber cooling,” and we finally have our hands on the TPC 812, a massive air cooler with six heat pipes and two vertical vapor chambers.

 

» Read More
avatar

Corsair H100 Review

Posted 09/05/2012 at 4:16am | by Nathan Edwards

Double your radiator space, double your fun

ANOTHER ALL-IN-ONE liquid-cooling loop! Hooray! Corsair’s H100 is its fifth liquid cooler; after two with Asetek, the company has put out three with CoolIT. The H60 is your standard 120mm radiator-with-single-fan, the H80 is the double-thick double-fan version, and the H100, the first Corsair liquid-cooler to support LGA2011, is its first cooler with a 240mm radiator.

The H100’s radiator is around an inch thick and 10.8 inches long and fits in any case that can accommodate a 240mm radiator, though some cases may not have the vertical clearance to mount the fans inside the case. The pump/heat exchange unit is square, and very slightly taller than Asetek’s. It contains four 4-pin PWM headers to control the radiator fans, as well as a connector for Corsair’s Link system control software/hardware combo (sold separately). There’s also a three-speed fan-control button on top of the pump. The pump unit itself has a 3-pin motherboard fan connector and a 2-pin Molex for power. The cooler unit mount is simple; four double-sided thumbscrews mount to the unified backplate, the brackets at the corners of the pump unit slide onto those, and more thumbscrews secure them in place.

 

» Read More
avatar

Intel RTS2011LC Review

Posted 09/05/2012 at 2:12am | by Nathan Edwards

Underwhelming in the extreme

Intel isn’t shipping stock heatsinks with Sandy Bridge-E CPUs, perhaps assuming that consumers of $600 and $1,000 CPUs are going to want performance a little better than Intel’s stock coolers have typically provided. Instead, Intel is offering a branded liquid-cooling loop as an optional accessory. The Asetek-built cooling loop features a glowing blue Intel logo and a bright blue LED on its single 12cm fan, but otherwise looks nearly identical to the Antec Kuhler 620, which was also built by Asetek (which also built AMD’s Bulldozer-branded liquid cooling loop).

» Read More
avatar

Zalman CNPS12X Review

Posted 09/04/2012 at 4:39am | by Nathan Edwards

The latest Zalman heatsink looks cooler than it is

THE CNPS12X MIGHT be Zalman’s most eye-catching cooler, with two arrays of black-nickel-coated cooling fins and three 12cm fans to push air through them. And it is massive. It’s 6.1 inches tall, 5.25 deep, and more than 6 inches wide, and weighs two pounds, four ounces. It’s so big it overhangs the inner four RAM slots on our Asus P9X79 Deluxe test motherboard, requiring the use of RAM without tall heat spreaders. The six direct-contact heat pipes rise into two sets of cooling fins, with the front and rear fans nestled into their respective fins, and the middle fan in between the two sets. All three fans are controlled via a single 3-pin power connector.

» Read More