Even the Intel fanboys have to hand it to AMD once in a while. After Intel deftly dropped a Core i5 anvil on Phenom II’s head, AMD did a quick drop to floor and now fires back slo-mo style with its own chip: a $99 quad core.
Dubbed the Athlon II X4 620, this 2.6GHz quad core isn’t just leftover parts swept off the factory floor, either. The Athlon II X4 is based on the familiar K10 microarchitecture in the Phenom and Phenom II, but it’s actually a newer, smaller die. In fact, the new chip has less than half the transistors of a Phenom II X4 processor. Much of the shrinkage comes at the expense of cache. While the Phenom II packs 6MB of L3, the budget Athlon II X4 features none.
The TDP of the new Athlon II X4 chips (there are two, but only one is sub $100) is also considerably lower than the top-end Phenom II X4 965 Black Edition chip at 95 watts versus 140 watts. Other than the TDP and lack of L3 cache, the CPUs are essentially the same as their Phenom predecessors.
Read on for our full analysis, review, and benchmarks!
There’s no denying that netbooks possess many positive attributes, as evidenced by their meteoric rise in popularity. But all the attention garnered by their portability and low cost can’t mask the deep and troubling performance that netbooks suffer.
The fact is, there are undeniable trade-offs inherent to a sub-$400 computer. You’re just not going to get the same performance from a netbook as from something that costs three times as much. Slow single-core Atom processors; middling hard drives; pokey, undersized SSDs; and only 1GB of RAM rob the netbook of its potential.
But there is hope. Whether you have an old Eee PC with a 12GB SSD or a new netbook with an Atom N280 chip and a 160GB hard drive, you can make substantial improvements without forking over too much dough. We’ll show you first-hand how netbooks can overcome their humble beginnings. We’ll upgrade a typical older netbook—an Eee PC 901 with a 4GB SSD soldered on the mobo and an 8GB PCI-E SSD—as well as a brand-new Toshiba NB205, to show how every netbook, from bottom-of-the-barrel to top-of-the-line, can benefit from upgrades.
Begin your journey to netbook empowerment after the jump.
How jacked up is your keyboard? Do you have one of those super-fancy, 800+ button, LCD-screen, lit-up, wheeled contraptions that's less an input device, more a control panel at a nuclear power plant? If so, you're probably the kind of person who doesn't need the apps I'm about to list out in this week's freeware roundup. Unless, that is, you're also one of those people (including yours truly) who have a ton of buttons and options to play with, yet no resolve to actually go about mapping this to that.
And if you're just rocking a plain ol' keyboard, I hope you're sitting down because you're in for a world of difference. The applications I'm profiling today are all keyboard-focused, and they all seek to add some kind of additional, awesome functionality to (or based on) your default button layouts. Launch programs! Use your keyboard media buttons to control all of your media players! Look up every Adobe-related shortcut within the span of seconds!
Suffice it to say, I have the keyboard krazies today. Join me after the jump to get your hands on some of the cooler keyboard-related freeware and open-source apps on the Internet!
If you were born in the 70s or 80s, chances are good that a big part of your childhood was spent wasting quarters at the local arcade, or in front of the Pac-Man machine at your local pizza place. Sure, games have become a lot more complex since then, but the old titles had a lot of charm, and in some cases a level of skill and patience-rewarding challenge that hasn’t been matched since.
Sadly, the arcade is rapidly becoming a thing of the past. Now that PCs and game consoles have become so powerful, the only way for arcades to compete has been to offer games with enormous, complicated controls, which end up costing a dollar or more per play. And besides, that’s only if you happen to live next to one of the very few remaining full-sized arcades. For most people, the closest thing they’ve got to an arcade is the worn-out Initial D machine at their local multiplex.
But you can bring the classic arcade experience back to life, in your own house. With a MAME arcade machine, you and your friends can play your favorite old games, on the authentic controls they were made for. In this article, we’re going to show you, step-by-step and with a lot of pictures, exactly how to build the custom arcade machine you’ve always dreamed about using old PC parts. We’re going to describe how we built our MAME cabinet, but we’re also going to describe all the choices we made along the way, including cabinet style, monitor and controls, so you can put together a machine that’s just right for you.
Eh. Technology upgrades. You don't need the latest graphic, motherboard, and CPU combinations to have a good time on your PC. Sure, having realistic raindrops fall across your warrior's face is a nice touch. And you can never go wrong with all those fun volumetric shadows and such--you know, the ones that cripple your poor videocard whenever you try and crank your display's resolution to the max.
A good game is all about the fun it brings to the table absent of technical wizardry or flashy effects. I like to call this the Nethack effect. For those recently born, Nethack is that old-school ASCII game that's still beloved by many even though its graphics could easily be replicated by a graphing calculator. The game doesn't need top-shelf scenery or character models to be awesome. It just is--by virtue of its immersion, frustrations, and countless ways to die.
As you might guess, This week's freeware roundup is another gaming-focused edition, but I'm covering a wide range of graphical treatments with the racing, hack-and-slash, and building-creation games I feature (amongst other categories). You'll see games that look pretty good given their open-source and freeware roots; You'll also see games that are a bit less, er, polished... but still worth your time for their creative features and fun action. You might even see a game that involves ponies.
Nehalem for everyone! That simple sentence best explains Intel’s brand-new series of CPUs, which is sure to please budget users everywhere while confounding power users.
Why would a new CPU that gives you the best bang for the buck in town be greeted nervously? Because Intel’s new CPU brings with it a new socket as well as a new infrastructure. This new infrastructure is essentially a fork in the road that forces users to make a difficult choice: Save money today but get locked out of the high-end, or splurge today knowing that the budget CPU is damn near as good as the top-end part.
For the details on Intel’s new budget monster, savor our full report, consume the specs, and then digest the benchmarks to see just which path your next PC should take.
Once a week, I feel like I'm either finding or running a large batch of programs in an effort to keep my computer as crap-free as possible. It's a never-ending battle. I defrag, I delete, I shuffle, I organize, I optimize, I scan... and still, what I end up downloading and installing over the next six days almost always leads me back to the good ol' "Sunday Purge," as I've come to call it.
And you? I venture that your habits are pretty similar to mine, as you're a Maximum PC reader with a thirst--nay, need--for speed. But we both don't have to waste a ton of time poring over our hard drives and giving them digital equivalent of a good flossing. There are tools, wonderful tools, that will automate this process--and automate it for free!
You're probably aware of quite a few of these applications, in fact. That's why I've cast my net over a wide swath of sites to find two little tidbits that you probably haven't heard of before. Here's a sneak preview: These tools let you assign rules for clearing out a wide variety of files based on customized criteria you select. One of the apps works its wonders on your desktop and the other offers a similar service for any USB device you attach to your system.
Intrigued? Those are but two of the five awesome programs in this week's freeware roundup. The rest are waiting for your trigger-happy downloading fingers after the jump, as always.
Factor these (now) thirty-six tests against an average of ten test suite iterations--a minimum number of variances that Resig runs in a common jQuery testing environment. That's three hundred and sixty runs for every test you create, more if you're expanding to include OSX and Linux platforms. And did I mention that the best results tend to occur when actual human beings are behind the testing instead of some automated attempt at user interaction? Yeaaaah...
Conceptually speaking, the Internet can be viewed as consisting of four functional layers: the Link Layer, the Internet Layer, the Transport Layer, and the Application Layer. Each layer has several protocols, sets of rules that define how data is formatted and transmitted, which are known collectively as the Internet Protocol Suite. We’ll discuss all four layers here, but we’ll dive deepest into the Internet Layer and its associated Internet Protocol (IP)—because this is the worldwide network’s most fundamental component.
The Link Layer is the lowest layer and is responsible for delivering data over whatever hardware is in use. A link consists of the physical and logical components that are used to interconnect host computers and other types of network nodes (a node is any electronic device that’s connected to the network, including hosts). Link Layer protocols, including Address Resolution Protocol and Media Access Control, operate only on a host’s link.
Continue reading about Internet Protocol after the jump.
In less than two months, Microsoft will finally release Windows 7 to an eager user base, some of which have already put Vista in the rear view mirror. Microsoft's slickest OS to date, Win 7 purports to do everything from improve file transfer performance to solving the world's problems and finally bringing peace around the globe.
On the other side of the tracks, Justin Long and the rest of the Apple allegiant will get a head start on the next-gen OS wars with Mac OS X 10.6 "Snow Leopard." And while we can knock Apple for its overpriced hardware and sissy aesthetics, OS X Leopard users will be able to upgrade for just $29, or less than a week's worth of lattes.
But we're not here to diss on Apple (at least not unnecessarily), nor do we intend to crank Microsoft's hype machine (seriously though, Windows 7 officially kicks ass). What we will do is take you all the way back to Windows 3.1 and examine how the OS wars have evolved in the modern era (you can find our pre-Windows 3.1 retrospective here). And for you open- source fans, fear not, you'll get your fill of Linux as well.
So sit back, grab a cold one (beer if you're a PC user, mocha cappuccino if you're a Mac user, and Bawls if you're rocking Linux), and hit the jump to get started!