As we learned with the Acer Timeline M3 we reviewed last month, Ultrabooks are not only growing in number, but in size. That’s the case with Samsung’s new Series 9, which comes in both 13.3- and 15-inch flavors. We took the latter for a spin to see how a larger footprint impacts the overall experience.
The Series 9 comes with support for Intel’s Wireless Display, so you can wirelessly stream 1080p content to a larger HDTV or monitor, provided you pony up $100 or so for the necessary adapter.
So a SandForce and an Indilinx controller walk into a testbed…
Are SSDs approaching commodity status? There are dozens of different consumer SSDs on the market, but with each successive generation it seems there are fewer controllers driving them. This time around the big players are LSI’s SandForce SF-2281 controller (found in OCZ’s Vertex 3 and Agility 3 drives, Patriot’s Pyro SE, Corsair’s Force 3 and Force GT, OWC’s Mercury Extreme Pro, Intel’s 520 Series, and so many more) and Marvell’s 9174, found in pretty much everything else. Samsung’s 830 Series drives have their own controller, but most of the rest of the market has one of two controllers, differentiated only by firmware and NAND choice. Here we examine two new SSDs: one with an off-the-shelf controller and one with a heavily modified one.
The $250 price point is where the hardcore and the serious gamer part ways. It’s not that hardcore gamers aren’t serious—it’s that they sometimes lose perspective, willing to throw vast, silly sums of money at shiny high-end GPUs. Serious gamers know that a good $250 graphics card will buy you high frame rates on standard, 1080p displays without requiring a second mortgage.
XFX’s “Ghost” fan shrouds are easy on the eyes, but they don’t vary much from card to card
Midrange boards typically have to sacrifice features to get under $200 and MSI’s Z77A-GD65 shows evidence of this philosophy. It’s the only board here without a discrete USB 3.0 controller, instead relying on the native Intel chipset for all USB 3.0. It’s also the only board without DisplayPort.
MSI shaved costs by jettisoning extra USB 3.0 ports on the Z77A-GD65.
Apparently budget board means legacy support. That’s what we inferred from Asus’s P8Z77-V board, which has a quaint PS/2 port and not one, but two PCI slots. Don’t think that means Asus cheaped out on more modern amenities, though. Although there’s no eSATA or FireWire, Asus includes some truly compelling features such as onboard Wi-Fi, an Intel LAN controller, incredibly fast USB 3.0, and a revamped Fan Xpert 2.
Of all the boards here, we’re most intimately familiar with Gigabyte’s GA-Z77X-UD5H. It’s the board we used for the bulk of our Core i7-3770K testing, and one thing we can say, it’s stable. We’ve literally run more than 50 hours of benchmarks on this board without any issue.
We hit our highest auto-overclock with the Gigabyte GA-Z77X-UD5H.
ANOTHER ALL-IN-ONE liquid-cooling loop! Hooray! Corsair’s H100 is its fifth liquid cooler; after two with Asetek, the company has put out three with CoolIT. The H60 is your standard 120mm radiator-with-single-fan, the H80 is the double-thick double-fan version, and the H100, the first Corsair liquid-cooler to support LGA2011, is its first cooler with a 240mm radiator.
The H100’s radiator is around an inch thick and 10.8 inches long and fits in any case that can accommodate a 240mm radiator, though some cases may not have the vertical clearance to mount the fans inside the case. The pump/heat exchange unit is square, and very slightly taller than Asetek’s. It contains four 4-pin PWM headers to control the radiator fans, as well as a connector for Corsair’s Link system control software/hardware combo (sold separately). There’s also a three-speed fan-control button on top of the pump. The pump unit itself has a 3-pin motherboard fan connector and a 2-pin Molex for power. The cooler unit mount is simple; four double-sided thumbscrews mount to the unified backplate, the brackets at the corners of the pump unit slide onto those, and more thumbscrews secure them in place.
Intel isn’t shipping stock heatsinks with Sandy Bridge-E CPUs, perhaps assuming that consumers of $600 and $1,000 CPUs are going to want performance a little better than Intel’s stock coolers have typically provided. Instead, Intel is offering a branded liquid-cooling loop as an optional accessory. The Asetek-built cooling loop features a glowing blue Intel logo and a bright blue LED on its single 12cm fan, but otherwise looks nearly identical to the Antec Kuhler 620, which was also built by Asetek (which also built AMD’s Bulldozer-branded liquid cooling loop).
WHEN WE REVIEWED the first-edition Noctua NH-D14 back in April 2010, we praised its quiet performance, but our then-current test bed didn’t put out enough heat to best showcase its cooling chops. Fortunately, our new one does. This coincides nicely with Noctua’s release of the NH-D14 SE2011, which includes (gasp) LGA2011 support and updates the D14’s two fans to include PWM, or pulse-width modulation.
SOMETIMES WHEN we use the Hyper 212 Plus in a build we get comments to the effect of, “Why don’t you use Xigmatek’s Gaia? It’s just as good and just as cheap!” Just as cheap? Definitely. Just as good? We’ll see!
Stop us if you’ve heard this before: The Gaia is a skyscraper-style stack of aluminum cooling fins on top of three direct-contact copper heat pipes. The Gaia is 6.5 inches high by 2.9 inches thick (with the fan) and 4.9 inches wide. At one pound, 4.7 ounces, it’s practically the same weight as the Hyper 212 Evo. Aside from the slightly narrower cooling fins and the fact that it has three heat pipes rather than four, and its 12cm PWM fan is held on by rubber pegs rather than a plastic clip, the Gaia looks a lot like the Evo.
We just realized that the Xigmatek Gaia’s cooling fins resemble the letter X.