I own an HTC Dream, otherwise known as the T-Mobile G1. Yes, it's now dated and slow and pitifully behind the curve compared to today's superphones, but with my contract just about up, I'm riding it out before switching carriers (T-Mobile's coverage in my area isn't the greatest). So how do I deal with constant smartphone envy? It helps that I rooted my G1 almost from Day 1.
Still today the XDA forums are brimming with modified firmware for the G1, and it's that culture of modders that helped make the first Android handset such a popular device. Surely then the recently released G2 would follow in the same footsteps, right? Sadly, that's not the case. Rather than encourage third-party ROM development, or even just leave them be, the G2 comes with a security mechanism that prevents the device from saving changes made by modified firmware.
Hit the jump to read T-Mobile's explanation on why this is necessary.
Last week we posted our review of the Parrot AR.Drone Quadricopter, an awesome piece of remote controlled machinery with a not-so-awesome price tag -- the thing streets for around $300. Don't have that kind of Skrilla to plunk down on a toy? Maybe you'd be more interested in building your own.
Greg "Grease" Lehman of St. Paul, Minnesota did exactly that and took 2nd place at the 2010 Minnesota State Fair with his wooden DIY quadricopter. Even better, he posted a fairly exhaustive worklog on Instructables.com.
Lehman used a blueprint that came with a Roswell Quadricopter he purchased back in 1999 as his general guide. The end result is a rad home-brewed quadricopter constructed from ash, oak, walnut, and padauk.
Do you share NZXT's concern that traditional case lighting methods that involve cold cathodes and solid LED boards tend to consume too much case space? If yes, then NZXT would be very happy to share “a fresh approach to case lighting” with you for a small price. Its new Sleeved LED Kit might just be the answer to many case lighting problems.
“NZXT’s unique design pairs sleeved wires with a high density of LED’s, enabling enthusiasts to snake the lights between side panels and under components with ease. The end result is a beautiful glow throughout the case with a clean installation that doesn’t detract from the internal aesthetics. Users can adjust the light brightness to low, medium, and high levels with red, green, blue, white, or orange kits,” reads the press release announcing the Sleeved LED Kit,” reads the press release announcing the Sleeved LED Kit
It will go on sale at the end of this month, with prices starting at $9.99.
Those of you who ever wanted to piece together your very own replica of Mass Effect's M8 Avenger assault rifle should send Harrison Krix a 'Thank You' card. This 28-year-old self-proclaimed "dork working in Graphic Design" went and posted a detailed work log on how to build a very cool looking knock-off of the in-game weapon.
"I've been a huge Mass Effect fan for awhile now, and with the release of the second game I knew I wanted to take a crack at building some of the weaponry from the ME universe," Krix explains. "As a bit of a personal challenge to myself, I decided to construct this gun from as much of my existing materials as possible. That is to say, 95 percent of what you see here is scrap I had in my shop from other builds. In the end, the entire piece cost me $28 in raw materials."
Krix walks readers through the blueprints stage and on through every last step, the end-result being a fantastic battery powered replica that lights up and even simulates the muzzle flash.
We have to hand it to Zachariah Perry, a 19-year-old sculpture student, blogger, and the man behind one of the coolest Iron Man Xbox 360 mods we've ever seen.
Perry took a standard Falcon HDMI-based Xbox 360 console and outfitted it with an Arc Reactor with bright white LEDs. "Also there is a ring of light around the outside of the Arc Reactor that mimics the ring of light around the power button," Perry explains in his eBay auction.
Completing the ensemble is a matching red controller and a 120GB hard drive with a "Stark Industries" label. Plenty more pics can be found on Perry's blog here.
Score a victory for Joe Consumer, who according to the U.S. government, is fully within his legal right to unlock his iPhone, or any other mobile phone, without having to look over his shoulder for Johnny Law. Not that Apple or anyone else would ever go crying to the cops for trivial matters (wait a tick), but it doesn't matter now anyway.
Federal regulators approved a bunch of new exemptions to a federal law that prohibits circumventing technical measures companies put into place to prevent unauthorized use of copyrighted material. Apple has always taken the position that jailbreaking is an unauthorized modification of its software and violates copyright law, but under the new regulation, iPhone owners are within their legal right to unlock their mobile device and install third-party apps.
Regulators also approved the practice of unlocking cell phones to use on an unapproved carrier, another practice that already exists (scores of iPhone owners roll with unlocked phones on T-Mobile's network, even though the iPhone is available exclusively through AT&T) and is now out of the legal gray area.
Palm Pre modder who goes by the name "unixpsycho" is living up to his nick with a new bit of firmware that comes with following disclaimer in big, bold, red lettering:
"DO NOT INSTALL THIS IF YOU LIKE YOUR PHONE!!! YOU HAVE BEEN WARNED!!!"
If that sounds over the top, consider that his latest firmware -- SR71 Blackbird -- pushes the Palm Pre's OMAP 3430 processor to 1.2GHz. That's twice the speed this little chip was meant to run at, which ships stock at 600MHz.
For those willing to throw caution to the wind, there are some safety measures that keeps this from being a total smartphone suicide mission. Temp monitoring comes built in, and whenever the chip jumps past 55C, the firmware ramps things down to 500MHz, "or at least it should."
For the most part, first impressions of Motorola's recently launched Droid X have been largely positive, but it's the eFuse chip contained inside that's getting all the attention. As was reported all over the place last week, modders who muck with the device's bootloader will set off the chip and end up with a bricked smartphone for their trouble, but that's all a bunch of hogwash, says Motorola, who set out to clear the air.
"Motorola's primary focus is the security of our end users and protection of their data, while also meeting carrier, partner, and legal requirements," Motorola wrote in an email to Engadget. The Droid X and a majority of Android consumer devices on the market today have a secured bootloader. In reference specifically to eFuse, the technology is not loaded with the purpose of preventing a consumer device from functioning, but rather ensuring for the user that the device only runs on updated and tested versions of software. If a device attempts to boot with unapproved software, it will go into recovery mode, and can reboot once approved software is reinstalled."
In other words, altering the phone's firmware won't result in a dead device like many had feared, but it does sound as though the Droid X will be harder to hack than other smartphones. Does that mean it will be impossible? We highly doubt it, given the modding community's never-die attitude, especially now that we know the Droid X isn't any danger of dying either.
Motorola's Droid X has been stirring up quite the stink on the Internet lately, with several websites pointing out how the device's eFuse chip could potentially spell the end of third-party mods.
Here's how it works. The eFuse chip is tasked with verifying the handset's firmware (ROM), the kernel, and the bootoader version. If it detects that something is awry -- like a third-party ROM -- the eFuse chip "ignites," so to speak, bricking the phone. The only way to undo the damage is to ship the device off to Motorola and hope that they'll be sympathetic to your plight. Perhaps you fell down a long flight of steps and through a series of bumps and bangs, you inadvertently downloaded a third-party ROM and installed it.
Sounds pretty gruesome, right? But let's back up a moment. It's now coming to light that the eFuse chip isn't anything new, and in fact it's included on all of TI's OMAP3 processors. Why is that relevant? Well, the gloom and doom scenario being played out in the press hasn't been an issue for past devices with the eFuse mechanism, like the original Droid and Milestone, and it would be odd if Motorola suddenly switched directions with the Droid X.
Let's not forget that the ability to mod is a huge draw for the Android platform, and something like this wouldn't be good for either Motorola or Google.
Would you be okay with Motorola locking down its hardware and bricking modded devices, or does something like this cross the line? Does all the hoopla surrounding eFuse influence your decision on whether or not to get a Droid X?
Steve Jobs and the rest of the Cupertino gang have come under fire recently for an issue with the iPhone 4 that causes it to lose reception. The worst part about this is all you have to do to inadvertently knock out the signal is...hold the smartphone. The issue is most prevalent when holding the smartphone a certain way (read: normally) with your left hand, and until that inevitable revision pops out of the Apple camp, the only solution to this so-called "non issue" is to grip the iPhone 4 differently. Or buy a case. Gee thanks.
Well, there's another solution, one which involves two strips of Scotch Tape. In a YouTube video, user "chedacheese" demonstrates how covering the black strip on each side of the iPhone with a strip of tape prevents the signal from dropping out.
"I have used some Scotch Tape to hold onto the sides here, and it actually keeps the signal bars steady," says chedachese in his out-of-focus video. "We've got full signal strength here. We are holding the device in its normal spots, and it is keeping the signal bars pretty steady. It's pretty well taped on the sides. And no other place but on the sides."
You can view the video here, and for those of you tired of the iPhone 4 coverage, perhaps this video will be more to your liking.