If you want to take full advantage of your PC’s audio potential, you should connect your rig to your A/V receiver and passive speakers—or a really good set of powered speakers. But accomplishing this task is often tricky, thanks to a combination of digital rights issues, proprietary surround-sound algorithms, and evolving connection standards.
Computers outfitted with Blu-ray drives and certain late-model videocards can deliver Blu-ray video over HDMI, but getting HD audio that way is another issue. An HDMI cable can carry both high-definition video and up to eight channels of high-definition audio (front left and right, front center, rear left and right, side left and right, and low-frequency effects). Blu-ray discs are typically encoded using Dolby TrueHD, DTS-HD, or DTS-HD Master Audio; all three of these eight-channel lossless compression codecs can deliver bit-for-bit perfect copies of the original movie soundtrack. Here lies the rub: PCs currently cannot output audio encoded in any of these formats over HDMI.
A properly outfitted PC running CyberLink’s PowerDVD 8, however, can decrypt and decompress Dolby TrueHD and DTS-HD and output it as uncompressed eight-channel LPCM (linear pulse code modulation) to HDMI. However, while videocards based on newer Nvidia GPUs are outfitted with HDMI, they’re all limited to two-channel LPCM (linear pulse code modulation) audio over HDMI, and that’s only if your motherboard has a S/PDIF-out header
AMD’s RV7xx-series cards can deliver uncompressed eight-channel LPCM audio over HDMI because they route the signals over the PCI Express bus. For integrated graphics, motherboards with Nvidia’s GeForce 8300 chipsets (for AMD CPUs) and GeForce 9300 or GeForce 9400 chipsets (for Intel CPUs), and those with Intel’s G35 Express, G45 Express, and G965 Express chipsets can do it, too.
We highlight the four most common PC audio scenarios. Pick the one that fits your situation and we’ll show you the best way to integrate your PC into your home-theater system.