ANOTHER ALL-IN-ONE liquid-cooling loop! Hooray! Corsair’s H100 is its fifth liquid cooler; after two with Asetek, the company has put out three with CoolIT. The H60 is your standard 120mm radiator-with-single-fan, the H80 is the double-thick double-fan version, and the H100, the first Corsair liquid-cooler to support LGA2011, is its first cooler with a 240mm radiator.
The H100’s radiator is around an inch thick and 10.8 inches long and fits in any case that can accommodate a 240mm radiator, though some cases may not have the vertical clearance to mount the fans inside the case. The pump/heat exchange unit is square, and very slightly taller than Asetek’s. It contains four 4-pin PWM headers to control the radiator fans, as well as a connector for Corsair’s Link system control software/hardware combo (sold separately). There’s also a three-speed fan-control button on top of the pump. The pump unit itself has a 3-pin motherboard fan connector and a 2-pin Molex for power. The cooler unit mount is simple; four double-sided thumbscrews mount to the unified backplate, the brackets at the corners of the pump unit slide onto those, and more thumbscrews secure them in place.