At first glance, the Hyper 212 Plus seems like Cooler Master’s original Hyper 212 with a different fan mounting system and support for sockets 1156 and 1366. But while the original had two sets of heat dissipation fins, one set for each end of the heat pipes, the 212 Plus adopts a more straightforward tower design, with the heatsink fins connected to both ends of each heat pipe. It’s the same basic and effective design seen in all of today’s top-performing air coolers. And unlike most coolers, the 212 Plus’s heat pipes contact the CPU directly. So, how do the Hyper 212 Plus’s stacks stack up against the competition?
The Hyper 212 Plus is one of the smaller air coolers we’ve tested recently—a big relief after last month’s monstrous Scythe Mugen 2. At 4.7 inches wide, 3.1 inches deep, and 6.2 inches high, the Hyper 212 is shorter than our champion, Thermalright’s U120, though it’s about an inch deeper. It’s also about a pound lighter, at 1.4 pounds to the Thermalright’s 2-plus pounds. Despite its relative lack of bulk, though, it managed to bump right up against the north-bridge heat spreaders on our EVGA 680i SLI board—a problem that would be avoided if the cooler’s fins started a half-inch higher up the pipes. To install the 212 Plus, we had to insert four standoff pegs into the motherboard and tighten them by bolting them to the backplate. An x-shaped bracket with spring screws at the corners holds the cooler to the CPU. We like this approach because it makes the cooler easy to install without having to worry about the backplate falling off, and the standoffs allow the use of shorter screws for the mounting bracket. Once the cooler was secure, we mounted the included 12cm fan using common wire retention clips—a simple task made difficult by the close proximity of the cooler to the north bridge’s cooling fins.
Cooler Master wowed us last year with its full-tower HAF 932, which garnered Maximum PC’s coveted Kick Ass Award (November 2008). Now we’ve gotten our hands on the midtower version of the HAF, the 922, and it looks awfully familiar.
Superficially, the HAF 922 is like a cross between the full-tower HAF 932 and last month’s CM Storm Sniper. In fact, HAF 922’s interior is virtually identical to the Sniper’s—it has the same fixed motherboard tray with the CPU backplate cutout, cable tie-downs, and cable-routing holes. The five 5.25-inch drive bays use the same toolless retaining mechanism, and the five 3.5-inch hard drive bays use the same slide-out toolless trays. But where the Sniper had toolless PCI locking mechanisms, the HAF opts for more-traditional thumbscrews. And the interior of the HAF, unlike the Sniper’s, is unpainted metal (although the Sniper’s motherboard tray isn’t painted, either).
The Cooler Master Storm Sniper, with its matte-black, mesh-covered shell and blue-glowing fans, looks like a prop from a sci-fi movie, the kind where cyber-soldiers rush into a building and start furiously hacking its defenses. And that’s awesome. It’s large for a midtower case, and looks even larger than it is, thanks to bowed-out side panels and feet that raise the bottom of the case an inch above the ground.
The Storm line is all about sturdiness, style, and portability—Cooler Master is apparently targeting LAN gamers—which it delivers. At 22.7 inches tall, 22.3 inches deep, 10 inches wide, and weighing in at more than 23 pounds, the Sniper is big-boned, but with sturdy handles on top, surprisingly luggable.
The Mesh bezels run from the bottom of the front panel all the way to the top, and the top panel has black mesh between its sturdy steel handles. The side panels are steel and bulge outward. The left side-panel has a large window covered by black mesh, to allow for air flow, and contains mounts for one 20cm or two 12cm fans.
Best known for its case and cooling products, Cooler Master this week announced its first mouse, the Sentinel Advance. Not an entry-level product, Cooler Master claims the professional-grade Sentinel is two years in the making.
The biggest standout on the feature list is the super sensitive 5600 DPI sensor, which CM says is the result of using twin lasers, Doppler Effect processing, and real-time tracking technology (as opposed to software prediction).
Other goodies include customizable macros and scripts, LED colors and light effects, a modular weight system, 64k internal firmware ROM for saving your settings, and even an OLED screen for displaying customized clan logos or whatever else you want your rodent to show off.
We've long heard that good things come in small packages, and that appears to have been Cooler Master's inspiration for its SNA 95, a compact 95W power adapter for laptops. In fact, it's the "smallest 95W adapter in the world," Cooler Master claims, measuring just 2.9 x 0.7 x 5.7 inches.
The late Billy Mays (may he rest in peace) would have a field day with this one, as not only is the SNA 95 the tiniest 95W adapter you can get, but it also sports a few extras, like a USB charging port, cable management base, and nine power tips so you can use it with your iPod, smartphone, PDA, GPS, and other mobile gadgets. It also comes with a smart LED indicator.
So far, we've only spotted the SNA 95 at Sundial Micro for $70 (currently out of stock), but expect to see more retailers carrying the device in the coming weeks.
It's been nearly six months since Cooler Master impressed us with its HAF (High Air Flow) chassis, a full tower case we deemed worthy of a 9/KickAss award (get your recap right here). Its combination of effective and quiet cooling along with build and cable management options made it a joy to work in, and Cooler Master looks to duplicate those same qualities in a smaller, more compact mid-tower package.
Cooler Master says its HAF 922 supports up to seven case fans in all, three of which support 200mm fans that can be swapped for smaller 120mm units (the case will ship with three fans - a 200mm front intake with red LED, 200mm top exhaust, and and a 120mm rear exhaust). Despite being a mid-tower, Cooler Master also says the downsized HAF will still support liquid cooling with room for an internally installed radiator.
In the tale of the tape, the new enclosure will check in at 10 (W) x 19.7 (H) x 22.2 (D) inches and weight 19.2 pounds, compared to its 932 big brother, which checks in at 9.6 (W) x 22 (H) x 22.2 (D) inches and 29.1 pounds.
We're told the HAF 922 will start shipping on May 12 with an MSRP of $130.
Cooler Master’s V8 CPU cooler offsets a somewhat time-consuming installation process with near-record-setting performance for an air cooler. The sleek aluminum cooler’s 12cm fan sits between two heatsinks on the device, sparing fingers from the accidental nip of its 800rpm-to-1,800rpm variable fan.
Cooler Master’s newest HAF (High Air Flow) chassis is the company’s magnum opus. It successfully unifies the best bits and pieces from a wide variety of Cooler Master’s previous cases under one roof. But more than that, the HAF features a number of unique and helpful additions that truly raise the bar for case design.
We never said water cooling was simple, and Cooler Master’s Aquagate Max doesn’t make the delicate assembly process any easier. But once you connect your last run of 3/8-inch tubing to this beastly setup, you’ll have accomplished two goals: doubling your geek cred and giving your processor an awesome heap of non-peltier cooling.
Hit the jump for delicious info on this ESA-enabled monster.