Quantcast

Maximum PC

It is currently Tue Apr 15, 2014 9:19 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: replacing proc in HP6835
PostPosted: Mon Jul 12, 2004 4:43 pm 
8086
8086

Joined: Mon Jul 12, 2004 3:40 pm
Posts: 3
Location: Honolulu, HI
my friend has hp pavillon 6835 and wants a new proc in it...it is a P3 socket 370 w/ a 100mhz FSB...they say it can support up to a 1gig P3, but it is cheaper to buy a P3 1.13g w/ 133FSB...i assume the 1.13 will be able to run at 1gig w/ 100FSB, but i have never tried it before...am i correct or do i just need to pay more for the 1gig proc? thanxs!


Top
  Profile  
 
 Post subject: Re: replacing proc in HP6835
PostPosted: Mon Jul 12, 2004 6:23 pm 
Folding Master (Top-ranked)
Folding Master (Top-ranked)

Joined: Thu Jun 24, 2004 2:22 pm
Posts: 2056
Location: Toledo, Ohio
xardion wrote:
my friend has hp pavillon 6835 and wants a new proc in it...it is a P3 socket 370 w/ a 100mhz FSB...they say it can support up to a 1gig P3, but it is cheaper to buy a P3 1.13g w/ 133FSB...i assume the 1.13 will be able to run at 1gig w/ 100FSB, but i have never tried it before...am i correct or do i just need to pay more for the 1gig proc? thanxs!


Check the hp site and see if there are any bois upgrades and what they bring with them. I do not beleive your motherboard will support a 133 fsb cpu.

Image


Top
  Profile  
 
 Post subject:
PostPosted: Mon Jul 12, 2004 7:01 pm 
8086
8086

Joined: Mon Jul 12, 2004 3:40 pm
Posts: 3
Location: Honolulu, HI
well, the only processors i have any experience with is amd's...and i know u can run them at slower speeds no problem (like at a 100fsb instead of 133), i assume Intel's P3s would be the same, but i have never delt with them before so i thought i would check first...


Top
  Profile  
 
 Post subject:
PostPosted: Mon Jul 12, 2004 10:42 pm 
Willamette
Willamette
User avatar

Joined: Fri Jun 25, 2004 3:34 pm
Posts: 1182
Location: So Cal
you might be able to call HP and ask


Top
  Profile  
 
 Post subject:
PostPosted: Tue Jul 13, 2004 12:39 am 
Chief Surgeon
Chief Surgeon
User avatar

Joined: Wed May 26, 2004 1:24 am
Posts: 6701
Location: M*A*S*H 4077, Korea
Xardion,

The fastest 100FSB Processor you could put into that would be the Celeron 1.4GHz. This was the final speed bin for S370.

Newegg's got 1.3's in stock:

http://www.newegg.com/app/viewproductdesc.asp?description=19-112-161&DEPA=0

Note: These "Celerons" (1.0GHz and higher) all have 256k onboard L2 Cache. So for all intent and purposes, they are P-III's.

SC64


Top
  Profile  
 
 Post subject: replacing proc in HP6835
PostPosted: Tue Jul 13, 2004 1:33 am 
Folding Master (Top-ranked)
Folding Master (Top-ranked)

Joined: Thu Jun 24, 2004 2:22 pm
Posts: 2056
Location: Toledo, Ohio
xardion wrote:
well, the only processors i have any experience with is amd's...and i know u can run them at slower speeds no problem (like at a 100fsb instead of 133), i assume Intel's P3s would be the same, but i have never delt with them before so i thought i would check first...


Think about what happens when you run a lower bus speed with the same multiplier.

[img]http://www.snackbar-games.com/folding/Phred15.jpg[/img


Top
  Profile  
 
 Post subject:
PostPosted: Tue Jul 13, 2004 6:02 am 
8086
8086

Joined: Mon Jul 12, 2004 3:40 pm
Posts: 3
Location: Honolulu, HI
thanxs for the help, i ended up ordering this proc from zipzoomfly...i will let u know if it worked :)


Top
  Profile  
 
 Post subject:
PostPosted: Tue Jul 13, 2004 12:43 pm 
Northwood
Northwood
User avatar

Joined: Sat Jun 26, 2004 2:44 am
Posts: 2496
Location: Wizzing into the abyss
xardion wrote:
thanxs for the help, i ended up ordering this proc from zipzoomfly...i will let u know if it worked :)



you're going to need an adapter to use a tualatin celeron 1.2MHz on that motherboard(i810)


http://www.upgradeware.com/english/prod ... /370gu.htm


http://www.powerleap.com/PL-370T.html


Top
  Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group