Quantcast

Maximum PC
It is currently Sun May 19, 2013 9:54 pm

View unanswered posts | View active topics


Board index » Hardware » Nuts & Bolts

All times are UTC - 8 hours




Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
jars_u
 Post subject: Catalyst Drivers for 9800 Pro
PostPosted: Sun Oct 10, 2004 3:16 pm 
Little Foot
Little Foot
User avatar

Joined: Mon Jun 28, 2004 8:25 am
Posts: 134
Hello,

Although Windows update is not telling me I need a new video driver or that one is available... I went out to ATI and found Catalyst drivers version 4.9 although it says "Installing a new driver is only recommended if you are having issues with your ATI product." which I am not having any known issues with 4.6 Was just wondering if this is the standard disclaimer they put on all dirvers or is this something new? I have a SAPPHIRE ATI Radeon 9800 Pro 128MB has anyone had any problems with 4.9?

Kind of wary of updates at the moment as I am having a BIOS issues that may or may not have been caused by a recent flash update.

Jim
Top
  Profile  
 
jars_u
 Post subject:
PostPosted: Sun Oct 10, 2004 3:19 pm 
Little Foot
Little Foot
User avatar

Joined: Mon Jun 28, 2004 8:25 am
Posts: 134
Also what's a good (free) over clocking utility that just offers fairly basic options for somone not looking to get into the mud too much with over clocking? Already added some heat sinks to the memory and increased the fans/venting to the video card. Not looking for drastic performance enhancement as I want to keep everything nice and stable.
Top
  Profile  
 
wunderbar
 Post subject:
PostPosted: Sun Oct 10, 2004 3:34 pm 
Team Member Top 100
Team Member Top 100
User avatar

Joined: Mon Oct 04, 2004 7:06 am
Posts: 1348
Location: Edmonton, AB, Canada
windows update is terrible at giving you updated drivers for products. Never trust it. Always to the manufacturers website directly to find drivers.

And with that, you should be safe installing the drivers for your 9800. ATI just says that I think. I always keep my drivers updated and have not had a problem as of yet.
Top
  Profile  
 
g.m.waters (red ranger3)
 Post subject:
PostPosted: Sun Oct 10, 2004 3:43 pm 
Team Member Top 10
Team Member Top 10
User avatar

Joined: Tue Jul 13, 2004 2:55 pm
Posts: 9013
Location: back on the right side of the middle of the left side YES i'm folding
windows only reccomends updates for win certified drivers which may take months ati has a new front end that controls everything, ati catalyst control center.
Top
  Profile  
 
jars_u
 Post subject:
PostPosted: Sun Oct 10, 2004 3:45 pm 
Little Foot
Little Foot
User avatar

Joined: Mon Jun 28, 2004 8:25 am
Posts: 134
Thanks!
Top
  Profile  
 
jars_u
 Post subject:
PostPosted: Sun Oct 10, 2004 4:16 pm 
Little Foot
Little Foot
User avatar

Joined: Mon Jun 28, 2004 8:25 am
Posts: 134
Well ATI Catalyst Control Center - crashed and burned on my system. I did a system restore and just downloaded the 4.9 drivers from ATI without the new control center - and fired up Dawn of War, everything seems fine.
Top
  Profile  
 
hotshotjosh
 Post subject: overclocking your Radeon 9800
PostPosted: Mon Oct 11, 2004 7:39 am 
Klamath
Klamath
User avatar

Joined: Wed Aug 25, 2004 7:33 am
Posts: 258
Location: Living in Guild Wars
Hey you had asked for a free utility that does some basic overclocking on your vid card. Try using Powerstrip by EnTech Taiwan. I've used it on my Radeon 9800PRO 256 and it works fine. You just have to adjust the slider up or down to increase or decrease the overall speed of your card. Not bad for a softmod.
Top
  Profile  
 
fitbabits
 Post subject:
PostPosted: Mon Oct 11, 2004 7:46 am 
8086
8086

Joined: Wed Aug 04, 2004 11:33 am
Posts: 82
Location: Hillsborough, NC
jars_u wrote:
Well ATI Catalyst Control Center - crashed and burned on my system. I did a system restore and just downloaded the 4.9 drivers from ATI without the new control center - and fired up Dawn of War, everything seems fine.


Did you install the .Net Framework from Microsoft first? The Control Center needs that to function properly.
Top
  Profile  
 
jars_u
 Post subject:
PostPosted: Mon Oct 11, 2004 9:38 am 
Little Foot
Little Foot
User avatar

Joined: Mon Jun 28, 2004 8:25 am
Posts: 134
Quote:
Did you install the .Net Framework from Microsoft first?


I did not... don't recall reading anything that said I needed to install something else first. Well before I make the effort again - what does the new control center let you do? Does it have over clocking options?

Do you have a link for the .net framework? Let me go out to google and try and find it.
Top
  Profile  
 
jars_u
 Post subject:
PostPosted: Mon Oct 11, 2004 9:42 am 
Little Foot
Little Foot
User avatar

Joined: Mon Jun 28, 2004 8:25 am
Posts: 134
http://www.microsoft.com/downloads/deta ... laylang=en

Quote:
Overview
The Microsoft® .NET Framework Software Development Kit (SDK) version 1.1 includes everything developers need to write, build, test, and deploy .NET Framework applications—documentation, samples, and command-line tools and compilers. You must install the .NET Framework Redistributable Package version 1.1 prior to installing the .NET Framework SDK.


So I need to intsall both of these to use the new control panel?
Top
  Profile  
 
fitbabits
 Post subject:
PostPosted: Mon Oct 11, 2004 9:44 am 
8086
8086

Joined: Wed Aug 04, 2004 11:33 am
Posts: 82
Location: Hillsborough, NC
jars_u wrote:
http://www.microsoft.com/downloads/details.aspx?FamilyID=9b3a2ca6-3647-4070-9f41-a333c6b9181d&displaylang=en

Quote:
Overview
The Microsoft® .NET Framework Software Development Kit (SDK) version 1.1 includes everything developers need to write, build, test, and deploy .NET Framework applications—documentation, samples, and command-line tools and compilers. You must install the .NET Framework Redistributable Package version 1.1 prior to installing the .NET Framework SDK.


So I need to intsall both of these to use the new control panel?


http://www.ati.com/products/catalystcontrolcenter/faq.html#3
Top
  Profile  
 
fitbabits
 Post subject:
PostPosted: Mon Oct 11, 2004 10:33 am 
8086
8086

Joined: Wed Aug 04, 2004 11:33 am
Posts: 82
Location: Hillsborough, NC
jars_u wrote:
http://www.microsoft.com/downloads/details.aspx?FamilyID=9b3a2ca6-3647-4070-9f41-a333c6b9181d&displaylang=en

Quote:
Overview
The Microsoft® .NET Framework Software Development Kit (SDK) version 1.1 includes everything developers need to write, build, test, and deploy .NET Framework applications—documentation, samples, and command-line tools and compilers. You must install the .NET Framework Redistributable Package version 1.1 prior to installing the .NET Framework SDK.


So I need to intsall both of these to use the new control panel?



Are you all set now?
Top
  Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Hardware » Nuts & Bolts

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group