Quantcast

Maximum PC

It is currently Tue Sep 30, 2014 12:06 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Slackware 10 is Out
PostPosted: Thu Jun 24, 2004 1:32 pm 
Forum's 3dfx Zealot
Forum's 3dfx Zealot

Joined: Thu Jun 24, 2004 1:21 pm
Posts: 251
Location: Florida
Here is the offically announcement


Announcing Slackware Linux 10.0!

The first Slackware release of 2004, Slackware Linux 10.0 continues
the more than ten-year Slackware tradition of simplicity, stability,
and security.

Among the many program updates and distribution enhancements, you'll
find two of the most advanced desktop environments available today:
GNOME 2.6.1 (including a collection of pre-compiled GNOME
applications), and KDE 3.2.3, the latest version of the award-winning
K Desktop Environment. Slackware uses the 2.4.26 kernel bringing you
advanced performance features such as the ReiserFS journaling
filesystem, SCSI and ATA RAID volume support, and kernel support for X
DRI (the Direct Rendering Interface) that brings high-speed hardware
accelerated 3D graphics to Linux. Additional kernels allow installing
Slackware using any of the journaling filesystems available for Linux,
including ext3, ReiserFS, IBM's JFS, and SGI's XFS. For those
Slackware users who are anxious to try the new 2.6.x kernel series, it
is fully supported by the system. A precompiled Linux 2.6.7 kernel,
modules, and source code are provided (along with complete
instructions on how to install the new kernel).

From the beginning, Slackware has offered a stable and secure Linux
distribution for UNIX veterans as well as an easy-to-use system for
beginners. Slackware includes everything you'll need to run a
powerful server or workstation. Each Slackware package follows the
setup and installation instructions from its author(s) as closely as
possible, offering you the most stable and easily expandable setup.

Here are some of the advanced features of Slackware 10.0:

- Runs the 2.4.26 version of the Linux kernel from ftp.kernel.org.
Special kernels were prepared to support hardware such as SCSI
controllers, USB keyboards and mice, parallel-port IDE devices,
IBM PS/2 machines with the Microchannel bus, and even speech
synthesizers providing access to Linux for the visually impaired
community. The performance of the 2.4.x kernel series along with
Slackware's track record of careful attention to system security
make it the perfect choice for running your production servers.

- As an alternate choice, Slackware 10.0 includes Linux 2.6.7
source, kernel modules, and binary packages, along with a new
mkinitrd tool and instructions on using it to install the
new kernel (see /boot/README.initrd). When running a 2.6
kernel, Slackware supports udev. This is a system for
creating devices in /dev dynamically, greatly reducing device
clutter and making it easy to see what devices are actually
present in the system.

- System binaries are linked with the GNU C Library, version 2.3.2.
This version of glibc has been patched to improve compatibility
with existing binaries.

- X11R6.7.0
This is the current release of the X.Org Foundation's X Window
System based on XFree86 4.4.0RC2. The 6.7.0 version is a new
release that includes additional hardware support, functional
enhancements and bug fixes. Font rendering is improved yet
again with recent versions of fontconfig and freetype. Through
the generosity of Bitstream, Inc., the Vera truetype font family
is included as well providing pleasing default fonts out of the
box.

- Major enhancements to the printing system include new versions
of CUPS (1.1.20) and LPRng (3.8.27). The Ghostscript interpreter
has been upgraded to ESP Ghostscript version 7.07.1 which offers
several improvements over the GNU release of Ghostscript, including
more drivers and better integration with CUPS. Two IJS servers
(printer driver suites for Ghostscript) are available in this
release: HPIJS, which supports more than 200 HP Inkjet printer
models (compared with 60 supported in Slackware 9.1), and
Gimp-Print, offering support for hundreds of printers from Canon,
Lexmark, HP, Epson, and other manufacturers.

- Installs gcc-3.3.4 as the default C, C++, Objective-C, Fortran-77,
and Ada 95 compiler. gcc-3.4.0 is available as an alternate choice.

- Support for fully encrypted network connections with OpenSSL,
OpenSSH, and GnuPG.

- Apache 1.3.31 web server with Dynamic Shared Object (DSO) support,
SSL, and PHP.

- PCMCIA, CardBus, and APM support for laptops. (pcmcia-cs-3.2.7).
Slackware also now includes hotplug support. This locates and
configures most hardware automatically as it is added (or removed)
from the system. It also loads the kernel modules required by
sound cards and other hardware at boot time.

- New development tools, including Perl 5.8.4, Python 2.3.4, and
graphical tools like Qt designer, KDevelop, and Glade.

- Updated versions of the Slackware package management tools make it
easy to add, remove, upgrade, and make your own Slackware packages.
Package tracking makes it easy to upgrade from Slackware 9.1 to
Slackware 10.0 (see UPGRADE.TXT). The slackpkg tool in /extra can
also help update from an older version of Slackware to a newer one,
and keep your Slackware system up to date. In addition, the new
slacktrack utility (in extra/) will help you build and maintain
your own packages.

- Web browsers galore! Includes Netscape Communicator version 7.1,
Konqueror 3.2.3, Mozilla 1.7 (with anti-aliased font support
and built-in junk email filtering), Epiphany 1.2.6, and Galeon
1.3.15.

- The complete K Desktop Environment (KDE) version 3.2.3, including
the KOffice productivity suite, networking tools, GUI development
with KDevelop, multimedia tools, the Konqueror web browser and
file manager, dozens of games and utilities, international language
support, and more.

- The GNU Network Object Model Environment (GNOME) version 2.6.1
(this already includes many of the updates for the upcoming 2.6.2
release).

- A collection of GTK based applications, including abiword-2.0.6,
gaim-0.78, gimp-2.0.2, gkrellm-2.2.1, gxine-0.3.3, and
pan-0.14.2.91.

- Large repository of extra software packages compiled and ready to
run. This includes various window managers, support for 3Dfx gaming
cards, OpenMotif-2.2.2, the K3b CD burning application for KDE,
libsafe (advanced buffer overflow protection for additional
security), ISDN support, additional 802.11 drivers, and much more
(see the /extra directory).

- Many more improved and upgraded packages than we can list here. For
a complete list of core packages in Slackware 10.0, see this file:

ftp://ftp.slackware.com/pub/slackware/s ... CKAGES.TXT

- Another Slackware exclusive: Slackware's ZipSlack installation
option is the fastest, _easiest_ Linux installation ever. ZipSlack
provides a basic text-based Linux system as a 45 megabyte ZIP archive.
Simply unzip on any FAT or FAT32 partition, edit your boot partition
in the LINUX.BAT batch file, and you can be running Linux in less
than five minutes. The ZipSlack installation includes everything you
need to network with Linux (including Ethernet, token ring, and
PPP), and extend the system with additional software packages such as
X. A ZipSlack system will even fit on a Zip(TM) disk, so you can
carry a personal Linux system with you to run on any PC with a
Zip(TM) drive.


Downloading Slackware 10.0:
---------------------------

The full version of Slackware Linux 10.0 is available for download from
the central Slackware FTP site hosted by our friends at www.cwo.com:

ftp://ftp.slackware.com/pub/slackware/slackware-10.0/

The ZipSlack version of Slackware can be downloaded from:

ftp://ftp.slackware.com/pub/slackware/s ... /zipslack/

If this site is busy, see the list of official mirror sites here:

http://slackware.com/getslack/

We will be setting up BitTorrent downloads for the official ISO images.
Stay tuned to http://slackware.com for the latest updates.


Purchasing Slackware on CD-ROM:
-------------------------------

Or, purchase the Slackware Linux 10.0 four CD-ROM set directly from
Slackware Linux, and you'll be helping to support the continued
development of Slackware Linux! :-)

This is the official release of Slackware on CD-ROM, and has many
enhanced features, including:

- Easy bootable CD-ROM installation. If your machine can boot a
CD-ROM, just boot the first disc to begin the installation process.
- Fully bootable live rescue CD-ROM -- just boot the second disc and
run a basic Linux system off the disc, including networking tools.
- The ZipSlack edition of Slackware Linux 10.0.
- The source code used to build Slackware Linux 10.0.

The price for the Slackware Linux CD-ROM set is $39.95 plus shipping.

Slackware Linux is also available by subscription. When we release a
new version of Slackware (which is typically once or twice a year) we
ship it to you and bill your credit card $24.95 plus shipping. Shipping
is $5 in the USA, Canada, and Mexico for First Class. Overseas is $9
PER ORDER. There is an additional $3 COD charge (USA Only). UPS Blue
Label (2nd day) [USA Only] is $10 PER ORDER, UPS Red Label (next day)
[USA Only] is $15 PER ORDER.


Ordering Information:
---------------------

You can order online at the Slackware Linux store:
http://store.slackware.com

Order inquiries (including questions about becoming a Slackware
reseller) may be directed to this address:
info@slackware.com

Or, send a check or money order to:

Slackware Linux, Inc.
1164 Claremont Drive
Brentwood, CA 94513
USA


Have fun! :^)

---
Patrick J. Volkerding <volkerdi@slackware.com>

Visit us on the web at: http://slackware.com







Slackware® is a registered trademark of Slackware Linux, Inc.


Top
  Profile  
 
 Post subject:
PostPosted: Fri Jun 25, 2004 7:07 pm 
Bitchin' Fast 3D Z8000
Bitchin' Fast 3D Z8000
User avatar

Joined: Sat Jun 19, 2004 2:28 pm
Posts: 52
yea again :P

this is the last time i will rereply :P


Top
  Profile  
 
 Post subject:
PostPosted: Fri Jun 25, 2004 8:39 pm 
Forum's 3dfx Zealot
Forum's 3dfx Zealot

Joined: Thu Jun 24, 2004 1:21 pm
Posts: 251
Location: Florida
See if these forums were run on a stable Slackware server none of this would happen. I would also point out if MPC did not hire idiots to handle the servers we would be fine too.


Top
  Profile  
 
 Post subject:
PostPosted: Wed Jun 30, 2004 5:43 pm 
8086
8086

Joined: Wed Jun 30, 2004 4:56 pm
Posts: 36
Location: Toronto, Ontario, Canada
Have you started using v10 of Slackware yet? It has been a few years since I last had a system running Linux [I was using v8 of Slackware last] but I am seriously thinking about setting it up again as a dual boot on first my desktop system, and then on my laptop. Slackware is my preference as that is where I got all my Linux knowledge. Any quirks or such with the v10 release? One of my goals is to be able to get gaming working via the wine software from Transgaming. Any experience with this? Any recomendations for good software not already included with Slackware?

Thanks,
Sully


Top
  Profile  
 
 Post subject:
PostPosted: Wed Jun 30, 2004 7:09 pm 
Forum's 3dfx Zealot
Forum's 3dfx Zealot

Joined: Thu Jun 24, 2004 1:21 pm
Posts: 251
Location: Florida
If anything slack 10 got amazingly better


I am not using the final slackware 10 yet i am still running 10.rc2

I am going to upgrade later this week to final as there was only a few package changes between 10rc2 and 10 final


Top
  Profile  
 
 Post subject: Re: Slackware 10 is Out
PostPosted: Wed Jun 30, 2004 7:44 pm 
Bitchin' Fast 3D Z8000
Bitchin' Fast 3D Z8000
User avatar

Joined: Mon Jun 14, 2004 4:04 pm
Posts: 985
Location: Earth
Great post! I've been wanting to try out Slackware, but chickened out because I'm so comfortable with either Windows or Gentoo.

Anyhow, I'll give it a shot, a friend of mine says that it's the best way to learn Linux.


Top
  Profile  
 
 Post subject:
PostPosted: Wed Jun 30, 2004 10:59 pm 
iron colbinator
iron colbinator
User avatar

Joined: Tue May 25, 2004 2:25 pm
Posts: 2761
Location: Washington, the state
I wonder how come they didn't call it "Slackware X" :P


Top
  Profile  
 
 Post subject:
PostPosted: Thu Jul 01, 2004 3:17 am 
Forum's 3dfx Zealot
Forum's 3dfx Zealot

Joined: Thu Jun 24, 2004 1:21 pm
Posts: 251
Location: Florida
colby wrote:
I wonder how come they didn't call it "Slackware X" :P



Because Pat is not cheap like that . That is why slackware is the most unix like linux and also why its the most stable out there. One man has complete final decession of every package. All i can say to you colby is only from a non slack user would say something like that.


Top
  Profile  
 
 Post subject:
PostPosted: Thu Jul 01, 2004 6:39 am 
iron colbinator
iron colbinator
User avatar

Joined: Tue May 25, 2004 2:25 pm
Posts: 2761
Location: Washington, the state
Jawa78 wrote:
All i can say to you colby is only from a non slack user would say something like that.


All I can say is that you didn't get the joke.


Top
  Profile  
 
 Post subject:
PostPosted: Thu Jul 01, 2004 9:42 am 
Forum's 3dfx Zealot
Forum's 3dfx Zealot

Joined: Thu Jun 24, 2004 1:21 pm
Posts: 251
Location: Florida
colby wrote:
Jawa78 wrote:
All i can say to you colby is only from a non slack user would say something like that.


All I can say is that you didn't get the joke.


I get the joke i just dont think it is very funny

ha ha ha

Mac OS ten aka X
slackwae X

Pat would never allow such of thing.

And that is why slackware is better than debian.


Top
  Profile  
 
 Post subject:
PostPosted: Thu Jul 01, 2004 2:20 pm 
iron colbinator
iron colbinator
User avatar

Joined: Tue May 25, 2004 2:25 pm
Posts: 2761
Location: Washington, the state
Jawa78 wrote:
Mac OS ten aka X
slackwae X

Pat would never allow such of thing.

And that is why slackware is better than debian.


Is there a debian X that I am missing? The current version is 3.0. And there are a bunch of other products than just MacOS that are named X.

It doesn't matter what anyone says to you, you have no opinion other than "everything sucks but slackware". They could be totally unrelated topics (like right now) and you come back with "haha everything sucks but slackware".

Slackware has its place, but maybe you could pull your dick out of Pat's ass for long enough to find out that there is a larger universe out there that you are totally shrugging off even though I doubt you've ever even used anything recent other than slackware.


Top
  Profile  
 
 Post subject:
PostPosted: Thu Jul 01, 2004 5:31 pm 
Forum's 3dfx Zealot
Forum's 3dfx Zealot

Joined: Thu Jun 24, 2004 1:21 pm
Posts: 251
Location: Florida
A. I would not pull it past the idiots at debian to call it debian X if it ever reaches verison 10.

B. Sorry I dont swing that way if you could being all pissy that you did not get to blow pat well that i not my fault what your wierd sexual crap is.

C. I was making a point about how I think that having one person have complete final say so is better than a bunch of people in a group trying to figure out what should get moved to the stable branch.

D. I have a deep founded respect for most Linuxes even debian. But you are pushing it . Overall other than the fact woody been the stable release since like forever I dont have much against debian if you look back debian was based off the same commerical distro that slackware started from SLS or at least that is what I have read about debian. Correct me if I am wrong. Only Linuxes I find disgusting are the over stupidified ones that ultimately have been based after slackware or debian. Lindows being one of them or should I say for legal reason linspire. Xandros , Redmond aka Lycoris hit my shit list but most others I have at least a respect for.

Yes do I try to mention slack when I can yes so it stays fresh in the minds of people.

Personally you are acting like one of those assholes in #debian on Freenode.


Top
  Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

© 2014 Future US, Inc. All rights reserved.