Maximum PC

T-bred xp 2600+ to 2.4GHZ 210*11.5

Geeze, what's your temp on that thing?

If you fold, as you damn well should, what's your foling temps?



Dan O.

I had to back it down a bit because my motherboard keeps undervolting on the vcore setting and couldn't keep it stable, so know it's set to 210*11 @ 2315 mhz Idle temp 42c and 47c load with watercooling.

I can get my Athlon XP 2400+ to hit 2300Mhz smoothly!

xp-m 2500 @2.5 440 fsb 1.70v

Sigh. My poor Palomino is so lame, I'm lucky I can overclock it from 1733 to 1820MHz.

i have a Intel 3.2 ghz pushed to 5.12 ghz. im using liquid nitrogen for my water cooling kit, dont ask how much i spend on LN...

And then you woke up.

p4c 3.2ghz OC'd to 3.36ghz 841 mhz fsb. see my post "is air cooling really dead?" for screen shots of the overclock.

I recently put some salsa on my brand new dorito nacho chip, made by nabisco, and now i can run at an incredible three bites a second!!!!!

I'm attempting to stick with a low latency memory timings (2-2-2-5) and a decent overclock on my 3.4C...so far this amazing new corsair XLL 3200 matched pair memory kit has let me overclock from 200fsb to 225 WITH PAT on my Asus P4C-800E....not bad at all!

maxx or does anyone else have pics of their water cooling setup?

i really cant overclock xeons, theres no option for multipliers. plus they run at 46 c and 50 c in closed case, hotter than most cpus, even when overclocked. but before with my p4p 800 i had a 2.4 ghz 533 fsb oc to 2.8

first time i overclocked was a penitum 3 on an abit mobo, which was so easy, because of its multiplier unlocked.

There's no options to change the mulitplier on the P4P800 either. OC the same way you did with that one.

And I'd hold off on water until you actually need it. If you run into Booradly, he has some good pics of a water system already taken and will probably show you.

Hey what MOBO do you have and what is the FSB on it?

3.2C @ 3.6Ghz 225FSB
MSI RX9800 @ 412/365
1024 HyperX PC-3500 DDR434 1:1 2.5-3-3-7
2 x 36.7Gb WD Raptors in RAID 0

3dMark2001SE = 20,494
3dMark03 = 6745
AquaMark3 = 48,472

i had it on an Asus A7N8X deluxe rev 2.0, i believe i was running 197x12 i'm currently running @ 2.24Ghz 187x12 i'm gonna try to get to 2.4Ghz this time

Hi fellas! First post here tho i've been browsing this forum for awhile now and have always been an avid Maximum PC reader

ok have my athlonxp T-Bred 2600+ run 210 x 11 (2.32GHz) watercooled at 37deg low fan speed and with the 120 cranked up its chillin' at 32deg.

tomjeffy how in the blue hell were u able to hit 210 x 11.5?! dun talk about stability , i can't even get it to post lol

P-4 Norhtwood 2.8 Danger Den Silver TDX reported speed by CPU-Z.......

3852
a little over a gig overclock...more than I expected to get

I have also overclocked my PC using nothing more than the FSB, so your little feat is really not all that amazing DEXTER. The specs are on a Athlon XP 1800+ Polimono core, as they are the most overclockable.

Before
Athlon XP 1800+ 1.53GHz
Memory 266MHz (133 Double Pumped)

After overclock
Athlon XP 1900+ 1.62GHz
Memory 288MHz (144 Double Pumped)
[/list][/quote]

Okay, so it's not a big leap, but it does the job.

the_river