Quantcast

Maximum PC

It is currently Fri Aug 22, 2014 10:27 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 588 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6 ... 30  Next
Author Message
 Post subject:
PostPosted: Tue Jul 13, 2004 9:48 pm 
8086
8086

Joined: Tue Jul 13, 2004 9:44 pm
Posts: 2
T-bred xp 2600+ to 2.4GHZ 210*11.5


Top
  Profile  
 
 Post subject:
PostPosted: Wed Jul 14, 2004 6:35 am 
Max [Ph]otographer
Max [Ph]otographer
User avatar

Joined: Mon Jun 28, 2004 4:10 pm
Posts: 5200
tomjeffy wrote:
T-bred xp 2600+ to 2.4GHZ 210*11.5


Geeze, what's your temp on that thing?

If you fold, as you damn well should, what's your foling temps?



Dan O.


Top
  Profile  
 
 Post subject:
PostPosted: Wed Jul 14, 2004 1:07 pm 
8086
8086

Joined: Tue Jul 13, 2004 9:44 pm
Posts: 2
Quote:
Geeze, what's your temp on that thing?

If you fold, as you damn well should, what's your foling temps?



I had to back it down a bit because my motherboard keeps undervolting on the vcore setting and couldn't keep it stable, so know it's set to 210*11 @ 2315 mhz :-) Idle temp 42c and 47c load with watercooling.


Top
  Profile  
 
 Post subject:
PostPosted: Thu Jul 15, 2004 8:55 am 
8086
8086
User avatar

Joined: Mon Jun 28, 2004 1:41 pm
Posts: 90
Location: Florida
I can get my Athlon XP 2400+ to hit 2300Mhz smoothly!


Top
  Profile  
 
 Post subject:
PostPosted: Fri Jul 16, 2004 3:56 am 
8086
8086

Joined: Thu Jul 15, 2004 3:00 pm
Posts: 8
Location: St Augustine FL.
xp-m 2500 @2.5 440 fsb 1.70v


Top
  Profile  
 
 Post subject:
PostPosted: Wed Jul 21, 2004 9:50 am 
All Your Basestar Are Belong to Us
All Your Basestar Are Belong to Us
User avatar

Joined: Fri May 21, 2004 7:40 am
Posts: 3219
Location: Da Basestar
Sigh. My poor Palomino is so lame, I'm lucky I can overclock it from 1733 to 1820MHz.


Top
  Profile  
 
 Post subject:
PostPosted: Fri Jul 23, 2004 8:13 pm 
M-Powered
M-Powered
User avatar

Joined: Mon Jun 14, 2004 8:36 am
Posts: 2504
Location: Nürburgring
Refilled my Danfoss compressor with a new R-508b refrigerant and replaced the DC 120mm fan attached to the condenser with a high profile AC industrial fan...

3.2C at 4.58 GHz
2.8C at 4.39 GHz


Top
  Profile  
 
 Post subject:
PostPosted: Fri Jul 23, 2004 11:33 pm 
BANNED
BANNED

Joined: Fri Jul 23, 2004 10:20 pm
Posts: 8
i have a Intel 3.2 ghz pushed to 5.12 ghz. im using liquid nitrogen for my water cooling kit, dont ask how much i spend on LN... :shock:


Top
  Profile  
 
 Post subject:
PostPosted: Sat Jul 24, 2004 6:22 am 
M-Powered
M-Powered
User avatar

Joined: Mon Jun 14, 2004 8:36 am
Posts: 2504
Location: Nürburgring
ELfudge wrote:
i have a Intel 3.2 ghz pushed to 5.12 ghz. im using liquid nitrogen for my water cooling kit, dont ask how much i spend on LN... :shock:


And then you woke up. :roll:


Last edited by maxx on Mon Jul 26, 2004 1:38 pm, edited 1 time in total.

Top
  Profile  
 
 Post subject:
PostPosted: Sun Jul 25, 2004 9:24 am 
8086
8086

Joined: Sun Jul 25, 2004 9:07 am
Posts: 29
Location: California
p4c 3.2ghz OC'd to 3.36ghz 841 mhz fsb. see my post "is air cooling really dead?" for screen shots of the overclock.


Top
  Profile  
 
 Post subject: My Amazing Chip!
PostPosted: Mon Jul 26, 2004 12:37 pm 
8086
8086

Joined: Thu Jul 22, 2004 2:16 pm
Posts: 74
I recently put some salsa on my brand new dorito nacho chip, made by nabisco, and now i can run at an incredible three bites a second!!!!! :twisted:


Top
  Profile  
 
 Post subject:
PostPosted: Wed Jul 28, 2004 6:05 pm 
Little Foot
Little Foot
User avatar

Joined: Tue Jun 29, 2004 5:25 pm
Posts: 133
Location: NJ
I'm attempting to stick with a low latency memory timings (2-2-2-5) and a decent overclock on my 3.4C...so far this amazing new corsair XLL 3200 matched pair memory kit has let me overclock from 200fsb to 225 WITH PAT on my Asus P4C-800E....not bad at all!


Top
  Profile  
 
 Post subject:
PostPosted: Fri Aug 06, 2004 9:56 pm 
Team Member
Team Member

Joined: Sat Jun 26, 2004 7:30 pm
Posts: 1691
Location: Houston Texas
maxx or does anyone else have pics of their water cooling setup?

i really cant overclock xeons, theres no option for multipliers. plus they run at 46 c and 50 c in closed case, hotter than most cpus, even when overclocked. but before with my p4p 800 i had a 2.4 ghz 533 fsb oc to 2.8

first time i overclocked was a penitum 3 on an abit mobo, which was so easy, because of its multiplier unlocked.


Top
  Profile  
 
 Post subject:
PostPosted: Sat Aug 07, 2004 2:16 am 
Boy in Black
Boy in Black
User avatar

Joined: Thu Jun 24, 2004 1:40 pm
Posts: 24339
Location: South of heaven
There's no options to change the mulitplier on the P4P800 either. OC the same way you did with that one.

And I'd hold off on water until you actually need it. If you run into Booradly, he has some good pics of a water system already taken and will probably show you.


Top
  Profile  
 
 Post subject:
PostPosted: Mon Aug 09, 2004 9:57 pm 
8086
8086

Joined: Mon Aug 02, 2004 7:45 pm
Posts: 6
Location: Canada
toidiochysp wrote:
i had a P3 450@540 ^_^
my 2500+ has been up to 2.38Ghz, now its 2.2. damn summer heat. i want winter back


Hey what MOBO do you have and what is the FSB on it?


Top
  Profile  
 
 Post subject:
PostPosted: Tue Aug 10, 2004 5:25 am 
8086
8086

Joined: Sat Jul 24, 2004 6:06 am
Posts: 76
Location: Pickerington, OH
3.2C @ 3.6Ghz 225FSB
MSI RX9800 @ 412/365
1024 HyperX PC-3500 DDR434 1:1 2.5-3-3-7
2 x 36.7Gb WD Raptors in RAID 0

3dMark2001SE = 20,494
3dMark03 = 6745
AquaMark3 = 48,472


Top
  Profile  
 
 Post subject:
PostPosted: Tue Aug 10, 2004 2:17 pm 
Team Member Top 50
Team Member Top 50
User avatar

Joined: Thu Jun 24, 2004 11:14 pm
Posts: 2108
Location: I'm Not sure
arcangel8735 wrote:
toidiochysp wrote:
i had a P3 450@540 ^_^
my 2500+ has been up to 2.38Ghz, now its 2.2. damn summer heat. i want winter back


Hey what MOBO do you have and what is the FSB on it?


i had it on an Asus A7N8X deluxe rev 2.0, i believe i was running 197x12 i'm currently running @ 2.24Ghz 187x12 i'm gonna try to get to 2.4Ghz this time :D


Top
  Profile  
 
 Post subject:
PostPosted: Thu Aug 12, 2004 2:51 am 
8086
8086

Joined: Mon Aug 09, 2004 10:21 pm
Posts: 5
tomjeffy wrote:
Quote:
Geeze, what's your temp on that thing?

If you fold, as you damn well should, what's your foling temps?



I had to back it down a bit because my motherboard keeps undervolting on the vcore setting and couldn't keep it stable, so know it's set to 210*11 @ 2315 mhz :-) Idle temp 42c and 47c load with watercooling.


Hi fellas! First post here tho i've been browsing this forum for awhile now and have always been an avid Maximum PC reader :)

ok have my athlonxp T-Bred 2600+ run 210 x 11 (2.32GHz) watercooled at 37deg low fan speed and with the 120 cranked up its chillin' at 32deg.

tomjeffy how in the blue hell were u able to hit 210 x 11.5?! dun talk about stability , i can't even get it to post lol


Top
  Profile  
 
 Post subject: Well??
PostPosted: Sat Aug 14, 2004 6:34 am 
8086
8086

Joined: Sat Aug 14, 2004 6:22 am
Posts: 3
Location: Michigan ??!!
P-4 Norhtwood 2.8 Danger Den Silver TDX reported speed by CPU-Z.......

3852
a little over a gig overclock...more than I expected to get


Top
  Profile  
 
 Post subject: Me Too
PostPosted: Sat Aug 14, 2004 1:13 pm 
Team Member
Team Member
User avatar

Joined: Sat Aug 14, 2004 12:58 pm
Posts: 255
Location: Defragging brain. Sector 25642401. Percent complete: 01000000%. 64-bit me.
I have also overclocked my PC using nothing more than the FSB, so your little feat is really not all that amazing DEXTER. The specs are on a Athlon XP 1800+ Polimono core, as they are the most overclockable.

Before
Athlon XP 1800+ 1.53GHz
Memory 266MHz (133 Double Pumped)

After overclock
Athlon XP 1900+ 1.62GHz
Memory 288MHz (144 Double Pumped)
[/list][/quote]

Okay, so it's not a big leap, but it does the job.

the_river


Top
  Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 588 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6 ... 30  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: mrmarrero, Teemi, Toovok and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group