Quantcast

Maximum PC

It is currently Thu Jul 31, 2014 3:08 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 22 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Born to Kill Silverstone Raven RV02
PostPosted: Mon Mar 22, 2010 7:04 am 
8086
8086

Joined: Mon Mar 22, 2010 7:00 am
Posts: 5
I have start this project a few days and i'm here too share with you guy's i hope you like what i already do and enjoy!

Born to Kill Silverstone Raven RV02 By Hardmodding Team

Hardware:
Case: Silverstone Raven RV02B-W
Cpu: Intel Core i5 750
Motherboard: Asus P7P55D
Mems: Gskill DDR3 PC12800 Ripjaws 4GB
GPU: Sapphire HD4770 512MB -.-"
PSU:Fractal Design Newton R2 800W

Watercooling:

Liquid: Feser One UV Blue
Res.: EK-Multioption 150mm Rev.2
Gpu Block: EK-VGA Supreme - Acetal
Cpu Block: EK-Supreme LT - Acetal
Tubo: Feser 13/10mm - UV light blue, 2,5m
Fittings: Bitspower matt black
Fittings: Bitspower matt black
Fittings: 45º Bitspower matt black

Just to warm up a bit :mrgreen:

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image

Note: The orange sleeve is not for this project :p

Image Image

:eek: :eek:
Image Image

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image


Image Image

Image Image

Image Image

Image Image

Image Image

Final photos soon :p


Top
  Profile  
 
 Post subject:
PostPosted: Mon Mar 22, 2010 7:12 am 
Million Club [PC]
Million Club [PC]
User avatar

Joined: Sat Mar 28, 2009 11:38 am
Posts: 7690
That's a great water-loop and amazing cable management! Individual sleeving is so labor-intensive. Are you going to do any mods to the case?


Top
  Profile  
 
 Post subject:
PostPosted: Mon Mar 22, 2010 9:02 am 
8086
8086

Joined: Mon Mar 22, 2010 7:00 am
Posts: 5
Thanks for the reply!

About the mods to the case i don't think because it's to a customer and he dont wanna change it!


Top
  Profile  
 
 Post subject:
PostPosted: Tue Mar 23, 2010 1:31 pm 
Team Member Top 1000
Team Member Top 1000
User avatar

Joined: Thu Jan 01, 2009 5:52 pm
Posts: 315
Location: Folding as BlacklinePC
800w power supply
4770
wut


Top
  Profile  
 
 Post subject:
PostPosted: Tue Mar 23, 2010 1:36 pm 
Million Club [PC]
Million Club [PC]
User avatar

Joined: Sat Mar 28, 2009 11:38 am
Posts: 7690
bbecker42 wrote:
800w power supply
4770
wut

mistype. It was a 5770. Still a lolwut though. :lol:


Top
  Profile  
 
 Post subject:
PostPosted: Wed Mar 24, 2010 12:52 pm 
Thunderbird
Thunderbird

Joined: Tue Apr 26, 2005 5:41 am
Posts: 935
Location: Califorina
I agree with what Spartacus said, amazing cable management in the case, I also own that case but without the WC so far its been a great case. Funny though how some say its a mid size case and others say its a full tower.


Top
  Profile  
 
 Post subject:
PostPosted: Sun Apr 04, 2010 7:36 am 
8086
8086

Joined: Mon Mar 22, 2010 7:00 am
Posts: 5
Just a small update sponsored by Mnpctech!

3x 120mm Steampunk Radiator or Fan Grill

Image

Image

Image

Just want to say thank you Bill and Mnpctech by sponsoring us whith one Steampunk rad grill in this project!

More photos incoming today! :P


Top
  Profile  
 
 Post subject:
PostPosted: Sat Apr 10, 2010 9:38 am 
8086
8086

Joined: Mon Mar 22, 2010 7:00 am
Posts: 5
A new update time ! Some of the cable are not ready because i will change it, like SATA cables to 90º and some other stuff's incoming to the project ! I hope you like it

Image

Image

Image


Top
  Profile  
 
 Post subject:
PostPosted: Sat Apr 10, 2010 2:29 pm 
Team Creamsicles
Team Creamsicles
User avatar

Joined: Sat Aug 05, 2006 6:41 pm
Posts: 1306
Location: Mahaska County Correctional Facilty
Man that is such a sweet rig! And theres nothing wrong with an 800w PSU in that rig. I never understood the reasoning in getting a PSU that just meets the needs of the setup, and no more. I always think having plenty of head room for power is very inportant. Plus you can add things to a certain level and not worry about if you have anough juice for it.

How did you get a sponsorship?


Top
  Profile  
 
 Post subject:
PostPosted: Sat Apr 10, 2010 7:26 pm 
Million Club [PC]
Million Club [PC]
User avatar

Joined: Sat Mar 28, 2009 11:38 am
Posts: 7690
mark_b_smith_II wrote:
Man that is such a sweet rig! And theres nothing wrong with an 800w PSU in that rig. I never understood the reasoning in getting a PSU that just meets the needs of the setup, and no more. I always think having plenty of head room for power is very inportant. Plus you can add things to a certain level and not worry about if you have anough juice for it.

How did you get a sponsorship?

Then again... he could add 20HDDs and 3 more 5770s and a CPU with a higher TDP and still not even come close the full output of the PSU... or he could have saved $100 and gotten a 500W. I don't understand your reasoning really, a 400W with a 5770 is plenty of power. An 1156 system with 2 HDDs and a 5770 pulls about 300W under 100% load. That's a lot of headroom for all the hard drives and fans you can stuff in there. Not another 5770, but move up to a 500W and another 5770 is now well under the output of the PSU.


Top
  Profile  
 
 Post subject:
PostPosted: Sat Apr 10, 2010 8:02 pm 
Team Member
Team Member
User avatar

Joined: Mon Nov 02, 2009 10:53 am
Posts: 162
That case looks amazing. on the cable management on the back side did you just rivet the cable holders?


Top
  Profile  
 
 Post subject:
PostPosted: Sun Apr 11, 2010 12:05 pm 
Team Creamsicles
Team Creamsicles
User avatar

Joined: Sat Aug 05, 2006 6:41 pm
Posts: 1306
Location: Mahaska County Correctional Facilty
Just saying there is not a thing wrong with having plenty of headroom with the PSU, it's the single most critical part of a power user or enthusiasts build. You get a high quality one and it will last through several upgrades. You have the extra $ to put into it, no reason not to do it. :wink:


Top
  Profile  
 
 Post subject:
PostPosted: Sun Apr 11, 2010 11:42 pm 
Willamette
Willamette
User avatar

Joined: Tue Jan 12, 2010 11:39 am
Posts: 1112
Location: On t3h h1gh s3@z, fly1n m@h fr3@k fl@g!
sukhoi342 wrote:
On the cable management on the back side did you just rivet the cable holders?


It would appear he used hex screws, possibly torx, but look more like hex. I envy this system, the overall artwork that's gone into this project is utterly awesome. I thoroughly applaud you.


Top
  Profile  
 
 Post subject:
PostPosted: Mon Apr 12, 2010 9:43 am 
Sharptooth
Sharptooth
User avatar

Joined: Sat Nov 20, 2004 3:42 pm
Posts: 377
Location: Mpls, Mn
soul train always does awesome work.


Top
  Profile  
 
 Post subject:
PostPosted: Mon Apr 12, 2010 10:05 am 
Team Member
Team Member
User avatar

Joined: Mon Nov 02, 2009 10:53 am
Posts: 162
The cable management in this case is flawless and the sleeving looks great. I would do that to my psu, but My case is windowless


Top
  Profile  
 
 Post subject:
PostPosted: Mon Apr 12, 2010 7:20 pm 
Boy in Black
Boy in Black
User avatar

Joined: Thu Jun 24, 2004 1:40 pm
Posts: 24339
Location: South of heaven
The way all builds should be, if we care about them that much. It's not hard, and is what the workshop is for: Inspiration of what is possible.

The problem is not actually doing it and just watching others do good work. Raise the bar.


Top
  Profile  
 
 Post subject:
PostPosted: Tue Apr 27, 2010 8:04 pm 
Team Member Top 50
Team Member Top 50
User avatar

Joined: Wed Sep 09, 2009 4:08 pm
Posts: 1514
Location: Alberta, Canada
That thing looks GREAT! Very nice cable work, wish my case had all those brackets.


Top
  Profile  
 
 Post subject:
PostPosted: Wed Apr 28, 2010 3:42 am 
SON OF A GUN
SON OF A GUN
User avatar

Joined: Mon Nov 01, 2004 5:41 am
Posts: 11605
Not sure I am a fan of the way the radiator is set up.... seems like you'd want more air getting through it.

Also, don't you want the CPU cooled first? I know it isn't necessarily practical but I would think having two loops would be ideal. One for CPU and one for everything else.


Top
  Profile  
 
 Post subject:
PostPosted: Sun May 02, 2010 7:08 pm 
Klamath
Klamath
User avatar

Joined: Thu Jan 29, 2009 4:15 pm
Posts: 305
CrashTECH wrote:
Also, don't you want the CPU cooled first?


Our very own Chumly has pointed out many times that the fluid in a cooling loop normalizes over time, so it doesn't matter where a certain block is in the loop.


Top
  Profile  
 
 Post subject:
PostPosted: Mon May 31, 2010 5:25 pm 
Team Member Top 250
Team Member Top 250
User avatar

Joined: Sun Nov 26, 2006 3:17 pm
Posts: 1156
I would like to point out a site for you.

Million Dollar PC

Your's definitely belongs there.


Top
  Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 22 posts ]  Go to page 1, 2  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group