Quantcast

Maximum PC
It is currently Fri May 24, 2013 10:17 am

View unanswered posts | View active topics


Board index » Help/Do It Yourself » PC Building Lab

All times are UTC - 8 hours




Post new topic Reply to topic  Page 26 of 30
  [ 582 posts ]  Go to page Previous  1 ... 23, 24, 25, 26, 27, 28, 29, 30  Next
  Print view Previous topic | Next topic 
Author Message
avanish11
 Post subject:
PostPosted: Wed Nov 19, 2008 4:21 pm 
Team Creamsicles
Team Creamsicles
User avatar

Joined: Sun Nov 18, 2007 7:06 pm
Posts: 3702
Location: Pennsylvania
simple_inhibition wrote:
got you all beat :wink:

Image


no validation though :oops: but still fun to look at :wink:


:shock: IT'S OVER NINE THOUSAND!!!!!!

for those of you who don't get the joke, here's a link: http://www.youtube.com/watch?v=TBtpyeLxVkI
Top
  Profile  
 
pillowsack
 Post subject:
PostPosted: Fri Nov 28, 2008 2:31 pm 
8086
8086
User avatar

Joined: Sat Nov 15, 2008 2:52 pm
Posts: 12
Don't cry out in jealously.
Image
Top
  Profile  
 
pillowsack
 Post subject:
PostPosted: Fri Nov 28, 2008 2:45 pm 
8086
8086
User avatar

Joined: Sat Nov 15, 2008 2:52 pm
Posts: 12
Hmmm check out my fast 3dmark06 run with that 600Mhz http://service.futuremark.com/home.acti ... BA2430678E

better then you guys get i bet
Top
  Profile  
 
sno.lcn
 Post subject:
PostPosted: Tue Dec 16, 2008 11:51 am 
8086
8086
User avatar

Joined: Fri Apr 14, 2006 3:50 am
Posts: 21
Location: Sunshine State, US
The title does say 'brag time' so here's my latest accomplishment :D



http://valid.canardpc.com/show_oc.php?id=461789

Image
Top
  Profile  
 
GBH
 Post subject:
PostPosted: Fri Jan 16, 2009 2:17 pm 
Million Club
Million Club

Joined: Sun Jul 06, 2008 9:48 pm
Posts: 327
Denis63 wrote:
I've got a e6550 @ 2.33ghz up to 3.15, but apparently it can go much farther :D 32 degrees C at load with a Thermaltake V1 in a Nzxt Apollo and a Gigabyte P35 DS3L.

WTF i just checked everest and im back to stock.... goddammit.

ah, well, i had my DDR800 Mushkin ram up to about 1030mhz and my fsb was at 1775 according to the Intel processor identification utility.

im going to Oc it again and ill add in some screenshots.


whenever i try and go higher, i BSOD, or my motherboard disables the overclock, which is what just happened....


My 6550 is at 3.4 :lol:
Top
  Profile  
 
ahenkel
 Post subject:
PostPosted: Sat Jan 31, 2009 11:43 pm 
Sharptooth
Sharptooth
User avatar

Joined: Mon Mar 10, 2008 9:50 am
Posts: 389
E4500 @ 3.0ghz 273x11 1092fsb 819mhz memory on a p35-ds3l

temps - 21c idle 46c load after 1 hour


Image
Top
  Profile  
 
Wild Alaskan
 Post subject:
PostPosted: Sun Feb 01, 2009 10:39 pm 
8086
8086
User avatar

Joined: Mon Jan 05, 2009 11:10 pm
Posts: 68
Image Image
Top
  Profile  
 
sasquatch42
 Post subject:
PostPosted: Fri Feb 06, 2009 4:03 pm 
8086
8086

Joined: Tue Feb 03, 2009 3:14 pm
Posts: 4
Ph2 940@4.5GHz
1.6volts

hoping to hit 5 with Ph2 720, prolly be slower than the 940@4.5 though
Top
  Profile  
 
Wild Alaskan
 Post subject:
PostPosted: Tue Feb 10, 2009 8:09 pm 
8086
8086
User avatar

Joined: Mon Jan 05, 2009 11:10 pm
Posts: 68
got a 105% overclock on the stock cooler on a clients computer. he wanted maximum overclocking so i guess he got it!

Image

im sure it could have gotten higher, its only set at 1.3 volts due to the heat and runs at ok 3.4 but has some errors in prime 95. I wish i had a better heatsink!
Top
  Profile  
 
Denis63
 Post subject:
PostPosted: Fri Feb 27, 2009 4:59 am 
Million Club - 2 Plus
Million Club - 2 Plus
User avatar

Joined: Sat Jun 07, 2008 9:29 am
Posts: 1105
GBH wrote:
Denis63 wrote:
I've got a e6550 @ 2.33ghz up to 3.15, but apparently it can go much farther :D 32 degrees C at load with a Thermaltake V1 in a Nzxt Apollo and a Gigabyte P35 DS3L.

WTF i just checked everest and im back to stock.... goddammit.

ah, well, i had my DDR800 Mushkin ram up to about 1030mhz and my fsb was at 1775 according to the Intel processor identification utility.

im going to Oc it again and ill add in some screenshots.


whenever i try and go higher, i BSOD, or my motherboard disables the overclock, which is what just happened....


My 6550 is at 3.4 :lol:




awww.... :( haha! well done.
Top
  Profile  
 
ShrimpBrime
 Post subject:
PostPosted: Wed Mar 25, 2009 10:53 pm 
Little Foot
Little Foot
User avatar

Joined: Wed Jan 30, 2008 10:24 pm
Posts: 180
4400+ @ 3542.56 mhz

http://valid.canardpc.com/show_oc.php?id=503507

Phenom II x4 940 @ 4112.76 mhz

http://valid.canardpc.com/show_oc.php?id=518120


Last edited by ShrimpBrime on Sat May 09, 2009 11:36 pm, edited 1 time in total.

Top
  Profile  
 
graydiggy
 Post subject: MUAHAHAHAHAHA
PostPosted: Sat Apr 25, 2009 10:01 am 
Million Club - 10 Plus
Million Club - 10 Plus
User avatar

Joined: Wed Apr 15, 2009 8:04 am
Posts: 1304
Location: Lost in a paper bag again...
Image

owned
Top
  Profile  
 
killerxx7
 Post subject:
PostPosted: Wed May 06, 2009 6:42 am 
Thoroughbred
Thoroughbred
User avatar

Joined: Tue May 06, 2008 3:18 am
Posts: 1917
Q6600 @ 3.0ghz
E2200 @ 3.0ghz
second E2200 @ 3.0ghz

All on stock volts nothing extream just like all my procs at 3.0ghz lol
Top
  Profile  
 
ACE
 Post subject:
PostPosted: Tue May 19, 2009 5:30 am 
Little Foot
Little Foot
User avatar

Joined: Tue Jun 29, 2004 5:25 pm
Posts: 133
Location: NJ
Too bad I didn't keep all those screenshots when I was doing phase cooling....thee days I'm just happy to be able to gt my Core i7 CPUs past 4ghz with air cooling...next project will be with DFI X58 UT mobo, DDR3-2000 memory and a D0 Xenon CPU...goal- 4.5ghz on air.
Top
  Profile  
 
Anthony010
 Post subject:
PostPosted: Fri Jul 03, 2009 7:48 pm 
8086
8086
User avatar

Joined: Sun Aug 12, 2007 6:42 am
Posts: 93
Image

Image
Top
  Profile  
 
simple_inhibition
 Post subject:
PostPosted: Mon Jul 13, 2009 9:14 pm 
Team Member Top 100
Team Member Top 100
User avatar

Joined: Sun Oct 09, 2005 1:17 am
Posts: 2947
Location: in front of my pc
latest work :) heres my 24/7 settings. 8hrs P95 stable, 20 runs of IBT and 20 Hours of Left 4 Dead behind it hahaha

Image
Top
  Profile  
 
NukeULater
 Post subject:
PostPosted: Fri Jul 24, 2009 10:03 am 
Thoroughbred
Thoroughbred
User avatar

Joined: Tue Jan 03, 2006 6:31 pm
Posts: 1883
Location: PWN1NG t3h No0bs w1th vi3ta ult1mat3 X64!
Intel Q9450 @ 3.6Ghz

75C under a lapped TRUE, with a 120x38mm Panaflow on it.

All the other specs are in the like below.

http://www.cpuoverclockers.com/settings/658-Intel-q9450-c1-ghz
Top
  Profile  
 
HellFighter
 Post subject:
PostPosted: Thu Dec 03, 2009 9:03 pm 
Team Member Top 500
Team Member Top 500
User avatar

Joined: Mon Jul 02, 2007 11:11 am
Posts: 1681
Image
Top
  Profile  
 
killerxx7
 Post subject:
PostPosted: Fri Dec 04, 2009 2:08 am 
Thoroughbred
Thoroughbred
User avatar

Joined: Tue May 06, 2008 3:18 am
Posts: 1917
http://valid.canardpc.com/show_oc.php?id=863508

Image
Top
  Profile  
 
Spartacus
 Post subject:
PostPosted: Fri Dec 04, 2009 8:33 am 
Million Club [PC]
Million Club [PC]
User avatar

Joined: Sat Mar 28, 2009 11:38 am
Posts: 7690
killerxx7 wrote:
http://valid.canardpc.com/show_oc.php?id=863508

Image

nice. Gotta love those high Nehalem multis.
Top
  Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 26 of 30
  [ 582 posts ]  Go to page Previous  1 ... 23, 24, 25, 26, 27, 28, 29, 30  Next

Board index » Help/Do It Yourself » PC Building Lab

All times are UTC - 8 hours


Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group