# Maximum PC

 It is currently Sat Aug 30, 2014 9:03 pm

 All times are UTC - 8 hours

 Page 1 of 1 [ 5 posts ]
 Print view Previous topic | Next topic
Author Message
 Post subject: ideas for laptop lightingPosted: Mon Oct 05, 2009 6:04 pm
 Million Club [PC]

Joined: Sat Mar 28, 2009 11:38 am
Posts: 7690
So I have a Toshiba Satellite A215-S4817, nothing to look at really. But I got thinking, if I put blue LED's in the speakers and maybe some on the front of it, that would look pretty darn cool. So of course now I have to give it a shot. My main problem is powering them. How would I do this, I'm not too experienced with pulling power from a laptop, and I'm not sure what kind of voltage LED's use.

Top

 Post subject: Posted: Tue Oct 06, 2009 4:49 am
 Million Club - 5 Plus

Joined: Fri Apr 25, 2008 6:35 am
Posts: 1998
LED voltages vary slightly depending on type, power output and color.. usually about 1.5 - 5v or so.. you can use any pretty much voltage LED as you will use a current limiting resister to match it to your power source.

you want all the wiring internal right? best bet for power is probably tap the +5v line to the HD or optical.

give me a bit and Ill get some specifics on blue LEDs and what resister to use for +5v.

Top

 Post subject: Posted: Tue Oct 06, 2009 5:43 am
 Million Club - 5 Plus

Joined: Fri Apr 25, 2008 6:35 am
Posts: 1998
OK here are a couple examples. used radio shack.

LEDs are diodes (duh) and as such they need a current limiting resister in series with them to limit what they can draw as they will present themselves as a short circuit when forward biased. the resister will also drop the voltage.

keep this formula in mind:

Resistance (in ohms)= Voltage (in volts) divided by Current (in amps)

rectangular

3.2v, 20ma

so for 5v supply to get 20 ma

r = 5 / 0.02
resister= 250 ohms

or this high output

5v, 30 ma

resister might be too much of a voltage drop with 5v supply so tap into 12v (if the notebook has that voltage? hmm this one may not be suitable but Ill include it anyway)

r = 12 / 0.03
resister= 400 ohms

dont worry if you cant find an exact match to the resister, use the closest one higher in value. each LED should have its own limiting resister.

Top

 Post subject: Posted: Tue Oct 06, 2009 12:44 pm
 Million Club [PC]

Joined: Sat Mar 28, 2009 11:38 am
Posts: 7690
Thanks for all the advice. With that 5V LED, can't I just tap the HDD's 5V power circuit, with no need for resistors?

Top

 Post subject: Posted: Tue Oct 06, 2009 1:23 pm
 Million Club - 5 Plus

Joined: Fri Apr 25, 2008 6:35 am
Posts: 1998
no, the LED will draw too much current and burn out. they will draw as much current as you let them. hence the current limiting resister.

you would need a 167 ohm resister to limit it to 30 ma, but that will also drop the voltage below 5v, so the LED may not fire up or will be dim.

Top

 Display posts from previous: All posts1 day7 days2 weeks1 month3 months6 months1 year Sort by AuthorPost timeSubject AscendingDescending
 Page 1 of 1 [ 5 posts ]

 All times are UTC - 8 hours

#### Who is online

Users browsing this forum: No registered users and 2 guests

 You cannot post new topics in this forumYou cannot reply to topics in this forumYou cannot edit your posts in this forumYou cannot delete your posts in this forumYou cannot post attachments in this forum

Search for:
 Jump to:  Select a forum ------------------ Maximum FAQs    Forum Rules, Posting Guidelines & Announcements    The Good, The Bad & The Banned    FAQs Help/Do It Yourself    PC Building Lab    The Help Desk    PC Modding    Education & Certification Hardware    Nuts & Bolts    Portable Talk    Appraisals, Deals & Bargains (oh my!) OS/Software/Programming    Windows Parlor    Alt.OS.Abode    Games Arena    Programmers' Paradise Networking/Internet    Internet Truckstop    Network Nook In/Out    Magazine and Book Feedback    Forum & Website Feedback    Dog Pound Team Maximum PC Folding at Home    Team Maximum PC - Folding at Home - FIND CURES TO DISEASES    Team MPC - Folding Gauntlets