Maximum PC

If you have a Corsair H100, I need to know how long the water tubes are.

I've got an old 2004 Silverstone case with the PSU on top.

I'd like to put a Corsair H100 at the top of the case after I cut a hole for it, but I'm not sure if the length of the water tubes from the radiator to the CPU block will reach the CPU on the mobo.

I've already googled my brains out on this and can't find a single reference to the length of the water tubes anywhere, in any of the reviews, and including Corsair. From all the pictures I've seen of the H100, it looks like the water tubes are about the same length as the radiator - about 10.8 inches, which will reach if I put the fans on top of the radiator inside the case.

I'd really like to be sure about the length first, before committing to buying the H100, or at least know if I have to fabricate a spacer between the top of the case and the radiator or radiator fan.

Thanks for the effort in advance.


Have a good one,

Rooke

Cancel that request...

I continued googling this one...

I finally found the correct search strings to find what I wanted. And I found the answer here.

For anyone else that needs this info, the H100 tube length is approximately 35cm or 13.77in. It should fit in my case, no problemo!


Have a Good One!

Rooke