I have this setup here:
2x2gb OCZ Reaper 800mhz DDR2
2x1gb OCZ Platnium 800mhz DDR2
450W no name power supply (safe power or something)
Cooler Master 590
Xigmatek S1283 with a Scythe 140mm 100 CFM fan mounted
Right now I'm running it at 3.4ghz (378x9), 1.43V (CPU-Z is showing 1.344 at load though), the ram is undclocked to 756mhz, 5-5-5-15 timings. I recently upgraded to this processor, (family was upgrading to an iMac so I did a swap, and also took another 2gb of ram). I play mostly FSX and do photo editing. I know I have a huge vdrop right now, not sure why maybe it's because I'm filling all 4 slots of with ram. My temps are around a max of 67C on one core and a low of 60 on another while running Prime 95 small FFT's. Are these temperatures normal? (Maybe the AC MX2 wasn't applied properly). What should be the next step for me? When they say the max voltage for the Q6600 is 1.5V, is that in the bios or in windows? (not that I would go much higher with these temps).