Okay, so first the background on the project. Here's the link to the project I'm working on:
I'm at the stage of assembly trying to put the screen onto the projector. The LCD I ended up with does not have the secondary input as the one in Tom's guide. So this means that I have some additional hardware that needs to stay connected so I can keep using the video cable. Below are two pictures to show what i'm talking about. Hopefully you won't have to be signed in to yahoo to view. It worked for me:
http://us.f1f.yahoofs.com/bc/efc9879d_m ... BBLFf0aq_X
http://us.f1.yahoofs.com/bc/efc9879d_m4 ... BBjrSyID_5
So in the picture you'll see that I have arrows pointing to the connection I'm having an issue with. It does not appear that I can bend that orange cable connected to the screen. The second pic shows the whole deal on the other side of the projector. I'm eying the dimensions, but it looks about 1ftx2ft. It does not specify on Tom's guide whether the screen needs to be faced down or not, but theirs looks like it is. I figured this would be the best place to get ideas from, so any suggestions would be great. thx.