ok, long story short, i was playing around in my BIOS and i acedintally saved changes instead of discarding them, not sure what happened but now my PC won't boot, it turns on normal then the screen just stayes blank, only thing i can think of is that i overclocked my FSB or my CPU unintentionally, chaintech has the shittiest manual i have ever seen for a mobo, in short i need to flash my bios, but they offer no info on how to go about that, my comp is this...
amdathlon xp 3000+
512 ddr 3200 (400)
Radeon 9800Pro 256 mb
Chaintech via kt600 mobo
any help is most apriceated, please don't hassle me with "haha your supid" posts
DOOOH!!! i've done that.
ok first try this hold "insert" key while powering on (hopefully that will get you in)
if not open case and reset cmos (disconnect power cord first).
you will have to correct you BIOS entries from default have resetting cmos (make sure you put the cmos reset jumper back to the normal posistion before turning PC back on after reset.)