The mobo - ASUS P5AD2 - 2 chassis fan 3pin plugs -- 1 is variably controlled by the bios depending on the temperature.
The case - Silverstone Temjin (Nimitz) TJ03 -
2 Rear exhaust - 80mm both with 3pin plugs only.
1 Front input - 120mm with a 3 pin and a 4 pin molex.
1 Top exhaust - 80 mm with 4 pin molex only.
The question is: should I connect one of the rear fans or the front fan to the variable chassis fan controller connector on the mobo?
I'm looking for the best air cooling
without the rig always
sounding like an air tunnel.
Any pro's or con's one way or the other would really help.