Quantcast

Maximum PC

It is currently Sun Sep 21, 2014 9:07 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: ASUS N6600/TD 256MB AGP Overclocking
PostPosted: Thu Mar 10, 2005 11:47 am 
Little Foot
Little Foot

Joined: Tue Mar 01, 2005 9:38 am
Posts: 110
Location: Kitchener, Ontario
Does anybody have an idea on how far these puppies can be overclocked, or about volt mods, It's the 6600 non GT. So far its running @ 27 degrees celcius and the core's overclocked by 200mhz!. i dunno how much farther i can push it!


Top
  Profile  
 
 Post subject:
PostPosted: Thu Mar 10, 2005 6:26 pm 
All Your Basestar Are Belong to Us
All Your Basestar Are Belong to Us
User avatar

Joined: Fri May 21, 2004 7:40 am
Posts: 3219
Location: Da Basestar
Cripes, that's some o/c. What are you doing with the memory?

If it's not locking up, and you don't see any artifacting, great job.


Top
  Profile  
 
 Post subject:
PostPosted: Fri Mar 11, 2005 7:48 am 
Little Foot
Little Foot

Joined: Tue Mar 01, 2005 9:38 am
Posts: 110
Location: Kitchener, Ontario
right now, my asus ic oc'd from 300 core, 500 mem (1 ghz effective)
to 600 core, 550 mem (1.1 ghz effecitve)
i think the core will go somewhere between, 650 and 700.
the highest temp ive gotten on the core is under 40 degrees celcius. 35 for the mem.

oh, did i mention it's the stock heatsink...
probably because i modded my case to reverse atx/btx, 120mm fan pushes air onto card from front of case

Here's the problem... i cant find an overclocking program that will go past 600mhz core.
Any suggestions?


Top
  Profile  
 
 Post subject:
PostPosted: Sat Mar 12, 2005 4:03 pm 
Thunderbird
Thunderbird
User avatar

Joined: Sun Jul 25, 2004 7:02 pm
Posts: 890
Location: Darkroom
I dont know about a software program but you if you do find some you could change the stock HSF to something like Zalman or Artic Cooling.
I dont know the specs of either of the heatsinks but you could also put RAM sinks on, if they fit, which I dont think they would with those aftermoarket heatsinks.
But good job none the less.


Top
  Profile  
 
 Post subject:
PostPosted: Sat Mar 12, 2005 9:24 pm 
Celeron
Celeron
User avatar

Joined: Fri Jun 25, 2004 7:13 pm
Posts: 7362
Location: New York City
masterngc wrote:
right now, my asus ic oc'd from 300 core, 500 mem (1 ghz effective)
to 600 core, 550 mem (1.1 ghz effecitve)
i think the core will go somewhere between, 650 and 700.

Any suggestions?


Wow, you MUST be kidding, right? Is your PC sitting somewhere really freakin' cold?

I'm skeptical: how could you have doubled the core speed?

By the way, the stock speeds on 6600's are 500MHz effective.


Top
  Profile  
 
 Post subject:
PostPosted: Sat Mar 12, 2005 11:01 pm 
Team Member Top 50
Team Member Top 50
User avatar

Joined: Thu Jun 24, 2004 11:14 pm
Posts: 2108
Location: I'm Not sure
if your having problems with programs not going over 600, you could consider flashing the BIOS with one from a later card. i know with Radlinker for my ATi card i can change the Mhz that i move up or down, and if i do that i can set the core to 3440Mhz, which would probally kill it instantly lol


Top
  Profile  
 
 Post subject:
PostPosted: Mon Mar 14, 2005 6:21 am 
Little Foot
Little Foot

Joined: Tue Mar 01, 2005 9:38 am
Posts: 110
Location: Kitchener, Ontario
The clock speeds on the asus is racheted down to 300. oh yeah, now running at 600/600 (1.2ghz effective) mem won't go any farther without sinks, but found way to overclock higher with rivatuner...
Will keep you posted...
oh yeah, also got a barton 2400+ oc'ed from 2000 to 2350-2400ish

oh, and im getting one of the zalman's, artic cooling doesn't have a heatsink for the agp version yet


Top
  Profile  
 
 Post subject:
PostPosted: Tue Mar 15, 2005 6:04 am 
Little Foot
Little Foot

Joined: Tue Mar 01, 2005 9:38 am
Posts: 110
Location: Kitchener, Ontario
sorry for the double post, but go here to see a picture of my overclock. www.geocities.com/masterngc/proof.html


Top
  Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group