My T-Bird 1400 seems to be a little hotter than I would like. I bought it from a friend and he said he had to force it by jumper to 1400 becuase it was running weird under Auto (he never clocked it before, just had to force it by jumper to 1400mhz)
Under normal (idle, its is a server) if I boot it, and go into the bios the CPU temp is around 49 C. Closer to 40 C I would expect. I have a Zalman copper heatsink on it and a 80mm fan pulling air out the back of the case.
I want to OC it a little (not sure how far I can reasonably expect to go with it, and I do not want to make it unstable becuase later on it will be under a little more load (only adding 2 more PCs to the network but it will be a fileserver/media server as well has handling DNS, DHCP, WINS...)
I am thinking of moving it to a case of mine that is slightly larger, and already is set up with a 1 rear, 2 side, 1 top 80mm ports. I am also going to pick up some round IDE cables this weekend.
Asus A7V133 mobo
GeForce 2 MX 32mb AGP
48 gb maxtor IDE
16x Dual Layer DVD+/-RW
2 Samsung SP1614C 160 gb SATA drives
Adaptect SATA connect controller
3com 10/100 NIC
The server is the one on the left, I am probably going to move it to the case on the right as it is slightly larger