Gigabyte GA-EP45-DQ6
Posted 08/15/08 at 11:00:00 AM | by Gordon Mah Ung
If you don’t just like Gigabit ports—you love them— Gigabyte’s GA-EP45-DQ6 is the motherboard for you. This mobo has four Gigabit ports that can be teamed together for one seriously fat-ass network connection.
Elsewhere, the board is typical Gigabyte; it includes surface-mounted buttons and the most clearly marked USB and FireWire ports we’ve ever seen. So if you nuke your USB drive because you plugged the USB connector into a FireWire header, it’s your own fault, brother.
The board, of course, is based on Intel’s new P45 chipset and sports two physical x16 PCI-E 2.0 slots. One runs at x16, the other at x8. Intel’s P45 doesn’t officially support 1,600MHz front-side bus speeds, but Gigabyte says the board will hit 1,600 without any issues. Since the GA-EP45-DQ6 is more of a midrange board, Gigabyte went with DDR2 instead of DDR3, which is understandable. Although it’s getting more affordable, DDR3 is still expensive if you want modules that will hit overclocked speeds of 1,600MHz or 1,800MHz.
We found no major layout gaffes with the board, and, in fact, favor the GA-EP45-DQ6’s design over that of the MSI P45 Platinum we reviewed in September. While the P45 Platinum gives you just two x1 slots, Gigabyte hands you two x4 slots and an x1 PCI-E, as well as the standard dual x16 slots.
The GA-EP45-DQ6 did lag behind the MSI P45 Platinum in several benchmarks. Some consumers will be troubled by this, but these performance hiccups are to be expected early in a motherboard’s release, and BIOS updates usually solve them.
So what’s not to like? The GA-EP45-DQ6 is a bit pricey for a P45 board—about $70 more than the faster, but not as well spec’d, P45 Platinum. And its price is within striking distance of X48-based boards, which are superior for CrossFire applications.
Still, if Gigabyte can correct the performance kinks, this is a pretty nice board for someone who isn’t running multi-GPU applications and, of course, just loves Gigabit ports.
Healthy dose of PCI-E slots and well-labeled USB and FireWire headers.
Performance lags behind other P45-based motherboards.
| Gigabyte P45 GA EP45-DQ6 | MSI P45 Platinum | |
|---|---|---|
| PCMark Overall | 8,402 | 8,756 |
| PCMark RAM | 5,800 | 5,737 |
| 3DMARK06 Overall | 12,440 | 12,735 |
| ScienceMark 2.0 Overall | 1,564 | 1,566 |
| ScienceMark 2.0 Mem | 6,980 | 7,112 |
| Valve Particle Test (fps) | 87 | 88 |
| UT3 (fps) | 107 | 117 |
| FEAR (fps) | 210 | 245 |
| Quake 4 (fps) | 179 | 177 |
why 4 lan port
Submitted by mewandwing on Sat, 2008-11-08 02:14
what would be the true reason for all the port? I have been listening to all the old podcasts but I need 1 to 56.
Gigabyte bites!
Submitted by Bratan on Fri, 2008-08-15 11:27
I had 2 Gigabite motherboards (one using right now "DS3") and they were most unstable mobos I've ever used (before always had Asus and Abit). Constant issues with USB, X-Fi cards and hibernation.No gigabyte for me in the future...
ethernet teaming on this board
Submitted by darkmatter08 on Fri, 2008-08-15 10:31
Hey everyone -
Since this board includes 4 Gbit ethernet ports and the drivers to team them, you said you could make one giant network connection. What gigabit router/switch supports the team the connections together? I am seriously thinking about doing that to build a powerful server.
darkmatter08
Just out of curiosity, what
Submitted by dannzeman on Fri, 2008-08-15 10:27
Just out of curiosity, what would be a practical use for all those Gigabit ports?
You can...
Submitted by Devo85x on Fri, 2008-08-15 14:21
The 4 ports make it good for building things like home servers, gaming systems, web servers, etc...










