How To: Slipstream your XP installation
Posted 01/01/05 at 01:20:28 PM by Maximum PC
Comments
Print
Email
Step 1: Collect the necessary files
Before getting started, we’ll need to download the full, stand-alone installation of Service Pack 2 (as opposed to performing a web-based upgrade). Go to download.microsoft.com and look under the Windows XP section or simply run Windows Update from Internet Explorer.
While you’re at it, grab the latest drivers for your RAID or Serial ATA controller. If you add them to your install CD, you won’t need to use an old-fashioned floppy drive to install Windows. For an add-in RAID or SATA card, look for the drivers on the web site of your controller chip’s manufacture. Some of the most popular controllers are made by Promise, Intel, Adaptec, and HighPoint. If your controller is integrated onto your motherboard, hit up your mobo manufacturer’s web site.
You can roll your RAID drivers into your XP install disc by slipstreaming!
Step 2: Update your setup files
Our next objective is to extract Service Pack 2 to a folder so we can update our existing Windows setup files. Open the command prompt by clicking Start, Run, and typing cmd.exe. Use the cd (change directory) command to navigate to the folder where you just saved the SP2 executable in the previous step. (The syntax for cd is cd , so if you saved the SP2 executable to, say, C:Downloads, you would type cd C:Downloads to go there.) Extract the SP2 files by typing xpSP2 –x, where xpSP2 is the name of the SP2 executable you downloaded. When prompted for a destination to extract the files to, enter C:xpSP2.
Once the files have been extracted, insert your Windows XP setup CD into an optical drive and copy its entire contents to a different folder on your hard drive. For the sake of simplicity, use C:xpsetupcd as the folder. Now, return to the command prompt and type the following command: C:xpSP2i386updateupdate /s:C:xpsetupcd. This will update your existing Windows setup files with the new code contained in Service Pack 2. A message box will pop up to notify you when the process is complete.
Service Pack 2's built-in updater makes it easy to patch y our original Windows setup files with Microsoft's latest code.
Step 3: Add your RAID/SATA Drivers
We’re now ready to add RAID/SATA controller drivers to our CD (if you don’t want to do this, skip ahead to the final step). Open the folder to which you copied your Windows XP CD (C:xpsetupcd) and create a subfolder called $OEM$. Then, create a subfolder of $OEM$ called $1 and a subfolder of $1 called drivers. The resulting path should be C:xpsetupcd$OEM$$1drivers. This is where Windows Setup will look for drivers that aren’t contained in its standard driver library. For organizational purposes, make a subfolder within drivers named for the type of driver it will contain—for instance, create a RAID folder for RAID drivers or an SATA folder for Serial ATA drivers. You can use any name, as long as it has fewer than eight characters.
With the aforementioned folder structure in place, copy the Windows XP RAID/SATA drivers directly into the folder you created above (we used C:xpsetupcd$OEM$$1driversRAID). If your drivers came in a self-extracting executable rather than a zip file, you may be able to extract its contents manually by opening it in a program like WinRAR. (Alternately, you can run the self-extracting executable, then dig around in your system’s TEMP directory—usually C:/documents and settings/YourUsername/LocalSettings/Temp until you find the right directory). Finally, locate the SYS file for your RAID/SATA controller from among the files you just extracted; it should be named after your specific controller (e.g. fasttx2k.sys for a Promise FastTrak TX2 RAID controller). The drivers for different operating systems may be split into distinct folders, so make sure you find the SYS file that’s intended for Windows XP. Once you find the SYS file, copy it to the i386 folder of your Windows CD (C:xpsetupcdi386).
Adding RAID or Serial ATA drivers to your Windows CD will save you the trouble of using a floppy disc to manually install them every time you reformat.
we know that we'll be forced
Submitted by girhadi on Sat, 11/14/2009 - 3:01am
we know that we'll be forced to pay feescanlı sohbet to broadcasters for the first timezonguldak sohbet odaları
andistanbul sohbet odalarıunfortunately our customers will have to foot the billchat
As a small cable operator, programming issohbet odalarıour already largest expense by far, and we simply cannot absorb any moreamasya sohbet odalarıincreases in our carriage fees.voip serviceerkeklerle sohbet
This includes the importance of human rationality, individual property rights, free marketsadana sohbet odaları natural rights, the protection of civil liberties, constitutional limitation of government, and individual freedomsohbet siteleri
iskameralı sohbet
fikralarla türkiye
Submitted by sandrewsmcp on Sun, 05/03/2009 - 8:07am
There is a much easier way to make a slipstream disk of Windows XP, use a free program called Nlite. Here's the link: http://www.nliteos.com/index.html
Submitted by adeletwo6789 on Tue, 09/29/2009 - 11:03am
Ah darn it, too late for an RMA... On the bright coursework | course work | coursework
writing | buy
coursework side, it didn't cost me much as I've salvaged everything from my old.custom
coursework | coursework
help | online
coursework | GCSE
Coursework | Statistics
Coursework
Submitted by tdt58 on Sat, 03/07/2009 - 6:11am
Hi !
I have a Presario CQ50 - 108EO with Vista Home. Want to install XP-Pro, but can't get it to work. Have read about this and I know that it is possible, but I'm not an expert on this so need help. Have read that the way to do it is to slipstreame a XP-CD with the needed drivers. Is there any place I can download a finish XP-CD with the right drivers to this laptop ? I want XP in english. I have my own CD-key. Any tips or help out here ? Thanks alot for reading this ! I will be very happy for any respons. Sorry for my bad english !
Many thanks from Morten in Norway.
Submitted by sandman6471 on Mon, 12/29/2008 - 10:42pm
Hi, New here. I've been messing with slipstreaming for just a little while now. I use nLite for slipstreaming and I use DriverMax. DriverMax lets you export all the drivers on your system to a file on your hard drive. So when you go to slipstream your cd in nLite you would selct "Drivers" as one of your options and it will ask you where the drivers are located, Just direct it to the file on your hard drive. This works great, as I have just slipstreamed my XP Home SP1 cd to SP3 with all the drivers included from my system. I also slipstreamed IE7 while I was at it. When I ran the setup cd, it comes up and shows my hard drive and the partition asking where I want to install Windows.
Just a little info. You guys probably already know about DriverMax(freeware). Just wanted to share my experiences.
Good Luck and Happy Slipstreaming..........:)
Submitted by Woofa on Sat, 07/19/2008 - 4:59am
So I take it none of you thought it a wise idea to write your slipstreamed image to rewritable media first to test it out? ALWAYS a good idea.
Submitted by MammonLord on Fri, 06/20/2008 - 3:40pm
The process as described above will result in an error if you are trying to include drivers with Service Pack 3.
The following section is incorrect:
----------
Now scroll down to the [SourceDisksFiles] section of TXTSETUP.SIF and add the following text:driver_filename.sys = 1,,,,,,_x,4,1
----------For SP3, use this instead:
----------
Now scroll down to the [SourceDisksFiles.x86] section of TXTSETUP.SIF and add the following text:driver_filename.sys = 1,,,,,,_x,4,1
----------Note that for SP3 you must add the line to the [SourceDisksFiles.x86] section of TXTSETUP.SIF instead of the [SourceDisksFiles] section.
I hope this helps you avoid burning 4 coasters like I did :)
Submitted by TomsSound on Sun, 05/18/2008 - 7:46pm
-Users interested in slipstreaming SP3 using this tutorial-
For Service Pack 3 (SP3)
the command that you use to slipstream the files into the cd is..
"update /integrate:c:\xpsetupcd "
Submitted by nl21099 on Mon, 03/24/2008 - 1:54am
drivers nodig
Submitted by keeto on Tue, 04/01/2008 - 11:47am
Had a fairly 'thick' time of it also, having a go at this, this, monstrosity.
Then tried one of the other ways[Autostreamer] and then eventually---nLite.
Much, much easier and just plain ole Magic! I am sending a donation to this guy/s, definitely...what a piece of work he must be.
When you try it and then, when succesful, you think of all the hair pulling and dementia that you have been thru for the last 2 days, etc. etc...
4 x I tried[using a rewrite :)] 4 fails.
Just Be a little careful of settings in the nLite panel.
and it should work fine...anyone that wants or needs assistance that I can do, I would gladly try and help. After this 'migraine' of a trial, nLite is a really good, good aspirin...it works.
Best of luck
Submitted by Ebaad on Thu, 03/19/2009 - 1:53pm
Hello,
I'm desperately in need of help with this; I just got an HP Laptop dv6-1050US and tried my best to load the XP on it and rip off the Vista, but so for not successful. I have triedediting files and nero to build the iso, also tried nlite several times, it worked for whilebut when rebooted the machine without CD it failed.I would really appreciate any help in this regards.
Thanks,
Ebaad.
Submitted by thakanson on Wed, 10/01/2008 - 5:00am
I couldn't agree more - nLite makes this process completely painless, and it's a free download. After me and several co-workers failed at other attempts, I came across this great tool and had it working in less than 10 minutes (including burning the CD). Just open nLite, tell it what you need to slipstream, point it at the driver files, then create the bootable ISO. Couldn't be easier.
Submitted by sonbd2 on Thu, 03/20/2008 - 7:52am
can you slipstream sata/raid onto xp 64bit. is it the same way for xp 32 bit
Submitted by Praxis99 on Thu, 03/06/2008 - 11:10pm
I've been looking at the issue of slipstreaming recently and could recommend the following:
Useful Programmes:
Autostreamer: Makes it extremely easy to slipstream your XP set-up.
Nlite: Takes a little time to get used too and you have to avoid the temptation to try throwing everything but the kitchen sink in to your slipstreamed mix-try it and you'll see what I mean! - but it seems in the main to work well.Also if you plan to try this you will make some mistakes along the way or wish to tweak your install a little more therefore its a good idea to use a Virtual PC package to try your install out before doing it for real. I've been using MS Virtual PC which is free and very easy to get to grips with. Finally for some good further background I can recommend the following site: http://unattended.msfn.org/unattended.xp/view/web/1/
Submitted by sonbd2 on Thu, 03/20/2008 - 8:05am
i made a xp 64bit boot dvd intergrated sata drive (iaahci)for my dp35dp intel mobo using nLite, when i used that disk installing xp64 onto my computer, it said something invalid with textsetup.sif file and can not install xp. can you show me what was that and how to fix that
Submitted by soulhealer on Wed, 01/23/2008 - 5:01am
IT IS DEFINITELY STILL NOT WORKING. I have wasted 3 DVD-R and 3 CD-R.but, still i get the 'iastor.sys not found error'. I already followed Ken99 method, but it doesn't rid the error. what a wasteful time and resources! anyone who's smarter, please post any fix here!!! thank you.
Submitted by Tom Bombadil on Wed, 11/07/2007 - 11:35pm
there's an easier way. I tried this way and made 10 coasters. Both will work, mine way just seems easier to me. http://www.crosseyedcamel.com/?p=15
Submitted by nick52 on Thu, 11/08/2007 - 8:55pm
Tom have gone the way you have wrked out but im struggling i have windows xppro iso but when i drag and drop into winiso its not saying its bootable bit new to this what am i doing wrong i know the windows works once burnt to cd so i dont understand why it doesent say its bootable help.
Submitted by nick52 on Wed, 11/07/2007 - 1:41pm
HELP were do i get the sata drivers
Submitted by DavidBrenchley on Thu, 10/11/2007 - 9:51am
Great article .. I might point out though that the OemPnPDriversPath entry shown in the example seems to be in error. In this instance it should read .. OemPnPDriversPath =drivers\RAID\FastTrack\WinXP
Submitted by jlerza on Thu, 09/06/2007 - 10:45am
Ken99:
I am using the iastor driver as well (for Intel DQ965GF mobo), and had no trouble with the WINNT.SIF file. I have pasted it below for your convenience. I think perhaps your troubles may be a forward slash versus back slash issue. Anyway, I have placed my drivers in the following location: "\$OEM$\$1\drivers\SATA\" and here are the contents of my WINNT.SIF file:
[Data]
AutoPartition=0
MsDosInitiated="0"
UnattendedInstall="Yes"[Unattended]
UnattendMode=ProvideDefault
OemPreinstall=Yes
OemSkipEula=Yes
NoWaitAfterTextMode=1
NoWaitAfterGUIMode=1WaitForReboot="No"
TargetPath=WINDOWS
DriverSigningPolicy=Ignore
OemPnPDriversPath=drivers\SATA[GuiUnattended]
OEMSkipWelcome = 1[UserData]
ProductKey=
FullName=""
OrgName=""I hope this helps.
-Jim
http://www.clearmyrecord.com/
Submitted by ken99 on Sat, 08/18/2007 - 7:48am
I have given this some more thought and reckon that the message that "Windows cannot copy iaStor" is because the directory path is wrong.
I tried starting with missing out the c: then got to thinking that perhaps the path has to be the location of the CDROM drive which in my case is E: However supposing it is not drive E in every case then it would not be universal. So what exactly is looking for what? Is it the C: drive looking for the driver or is the search originating from the CDROM drive?
It's taking me a lot of CD blanks to get nowhere so far!
It amazes me that Microsoft sells a product that seems to be unloadable without giving a proper workaround.
Submitted by ken99 on Fri, 08/17/2007 - 8:04am
I too had the problem with the driver path so I omitted the c:\xpsetupcd as when the disk is burned this part of the path is not included. The setup still asked for the floppy but then it did not stop to ask again prior to installation but gave a message saying "iaStor.sys could not be added" - probably not the exact words - and gave option to ignore. Installation continued but in the end gave the blue screen!
Needs more work I think
Submitted by ArthurSmith on Wed, 07/04/2007 - 4:43am
Well I found my error and can now boot the slipstream CD, but it isn't finding the driver that I want.
I'm having some trounble understanding the WINNT.SIF file - the Notepad screenshot in Step 5 shows a C: path. I'm assuming that is incorrect because there will be nothing on the C: drive before XP is installed. It doesn't help either that the backslash characters are omitted.
Can anyone help please?
Submitted by Jaak on Fri, 06/29/2007 - 8:20am
Hi,
Doing it yourself can be done, and the method is explained right here. A picture tells a lot more than the txts found and this tutorial is really good. However, the work itself is tedious, and errors are easily made. That was why I started looking for better solutions. Nlite was the first one I tried, for a single "F6" floppy integration, and soon after, I had to do this again for another. And for another.
Kind Regards, Jaak.
MVP award 2006/2007
Submitted by ArthurSmith on Wed, 07/04/2007 - 3:59am
I've failed to get this working to include a SATA driver. Have followed the instructions very carefully but when I try to boot with the new disk I get a message:
1. FDD 1.4M SYSTEM TYPE -(06)
CDBOOT:CANNOT BOOT : CODE 4
This is an odd message to get as the PC doesn't have a FDD and I have added nothing to the files to suggest the use of one.
Can anyone help please?
Submitted by dcutefrog on Sun, 06/10/2007 - 8:21am
Is there any way to slipstream all the updates since SP2?
Submitted by Jaak on Fri, 06/29/2007 - 12:32am
YES, RVM integrator, at MSFN.
Kind Regards, Jaak.
MVP award 2006/2007
Submitted by Jaak on Fri, 06/29/2007 - 12:33am
Andrew Connell (another MVP) once wrote a blog and when I found details on his way to do this, I looked.
NLite can slipstream drivers, and help you make an ISO, but DriverPacks.net has DPsBase and drivers neatly packed and filtered, ready for slipstream. The DPsBase is donationware. I have been helping to improve and update those driverpacks soon after I got impressed, and they are used by large organisations. Nlite Cannot be used for the many hundreds of drivers included in the driverpacks. DPsBase can do this task in a way OPK and Nlite couldn't, and does it for XP, windows 2000, and server (32 bits only.).
http://users.pandora.be/jtdoom/basetute/Eng_tut6b.htm
Kind Regards, Jaak.
MVP award 2006/2007
Submitted by Quentin T on Sun, 06/03/2007 - 12:04pm
I recently found this freeware app to help with slipstreaming (especially drivers). it's Called nLite. The driver insertion in this article is a little tough to understand/implement. This app takes a little time to get used to, and you may burn a few coasters/undesirable XP discs but in the long run it's a great program. http://www.nliteos.com/
Submitted by tarrsik on Thu, 05/31/2007 - 4:05pm
Any chance on an update to this article? Would be great if it was more current.
WHY!?
Submitted by Chumly on Mon, 03/24/2008 - 3:34pm
Slipstreaming is slipstreaming. What new must a person add? If you "get it", you get it. Nothing changes but what you add.
Submitted by sreenidhibs on Sun, 08/17/2008 - 7:31am
integrating sata drivers or slipstreaming is not tht difficult with nlite.
here is a detailed explanation of slipstreaming and integrating drivers along with screenshots.
http://techtricks.x10hosting.com/?p=27.
this can help those who still have problems integrating and slipstreaming.
techtricks.x10hosting.com
techtricks.co.in
Must Read Articles
Feature
Review
Feature
Feature
Feature
Most Popular Articles
This Month's Issue
FEATURE How to Get FREE Programs, Services, Software & MoreFEATURE Digital Photo Printer RoundupHOW TOBuild a 3D CameraFEATUREDIY Arcade PCWHITE PAPERHow TRIM Works
Technology News
Computer Cooling Fans
Computer Cases
PC Game Controllers
PC Games
Computer Hardware
Headphones
MP3 Players
Stream Video
Computer Mouse
Monitors
Motherboards
NAS Storage
Networking
Laptop Computers
DVD Burner
Digital Cameras
Portable Storage
Computer Accessories
Smartphone
Antivirus Software
Sound Cards
Speakers
Computer Systems
Thumb Drives
Video Cameras
Video Card Reviews
Water Cooling
Gadgets
- Keyboards
© 2009 Future US, Inc. All Rights Reserved.